Boss 302 Power Pack With JLT Series II Cold Air Intake Kit GT 2011-2014

CJ's Part Number:
PP133
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 4.85ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
MSRP $1,727.23
$1,319.99
You save 24%

Boss 302 Power Pack with a JLT Performance Series II Cold Air Intake Kit for all 2011, 2012, 2013, and 2014 GT Mustangs.

This Boss 302 Power Pack includes everything necessary to upgrade your 2011-2014 Mustang GT and install the 2012-2013 Boss 302 Intake Manifold, associated accessories, necessary hardware, and a JLT Series II Cold Air Intake Kit. Take advantage of this Power Pack to order everything you’ll need in one easy to find part number. This Power Pack will allow you to complete the installation with the addition of a JLT Series II Cold Air Intake, so you know you will get the biggest horsepower gains out of this setup with a little help from JLT Performance.

Included in Power Pack:
- Ford Racing Boss 302 Intake Manifold
- JLT Performance Series II Black Textured Cold Air Intake Kit
- Ford Boss 302 Strut Tower Brace
- OEM Fuel Vapor Hose
- OEM Fuel Line
- OEM Left and Right Boss 302 Fuel Rail Covers
- OEM Purge Valve Bracket
- (2) OEM Purge Valve Bracket screws
- (3) OEM Fuel Rail Cover Retaining nuts
- Ford Racing Logo Decal

The shorter runners of the Boss 302 intake manifold offer your Mustang optimum flow at higher Rpms. The silver powder-coated Boss 302 Strut Brace will stiffen the front end of your 2010-2014 Mustang GT with the original strut tower brace found on the 2012-2013 Boss 302. The factory 11-14 GT strut tower brace will NOT clear due to the increase in height of the new Boss 302 Intake Manifold. The Boss 302 Fuel Rail Covers not only look great, but they will function as insulator against radiant heat reaching your fuel rails and help reduce unwanted noise that may make its way in the driver compartment. And the JLT Series II Cold Air Intake will finish off this ultimate Power Pack to give you the biggest bang for your buck!

Series II Cold Air Intake Includes:
- JLT Black Textured Plastic Intake Tube
- 4" Silicone Coupler for Aftermarket Throttle Bodies
- 4-3.5" Silicone Reducer for Stock Throttle Bodies
- 5x7 S&B Powerstack Air Filter
- Roto-molded Heat Shield
- HD Clamps, 2013-2014 hood insert plug and all hardware
- Additional Fitting for Automatic Vehicles

With the addition of the JLT Series II Cold Air Intake, Fuel Vapor Hose, Fuel Line, Purge Valve Bracket, Purge Valve Bracket Screws, and Fuel Rail Retaining Nuts, this all-in-one power pack will allow you to swap your 2011-2014 GT over to the Boss 302 Intake Manifold and JLT Series II Cold Air Intake with ease.

*A custom tune/calibration will be required after installation, NOT included.

Order the Boss 302 Power Pack with a JLT Performance Series II Cold Air Intake Kit for your 2011, 2012, 2013 or 2014 Mustang GT from CJ Pony Parts today!

Installation Difficulty

Difficult
Difficult

Advanced skill is required for this installation.

Installation Videos

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.23ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

will it work with an automatic on my 2013

Asked by: franko24
Yes it will.
Answered by: rk cjpp
Date published: 2019-05-17

Will it fit on a f150 5.0?

Asked by: slowwhitedude
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: jmg1
Date published: 2019-01-15

What is the suggested means to custom tune after installation? Plug and play flash tune or real deal hard wire written tune?

Asked by: Alex2799
We offer several programmers that allow you to load custom tunes that you source from a third party and there are several options out there for tuning support. We suggest looking in to Lund Racing. If you don't want to purchase a device and then source a tune later, you can pick up the Lund Racing nGauge from us, see P/N: NG2-V and then select the Intake Manifold Tune from the drop-down menu.
Answered by: CJPP Dave
Date published: 2018-10-03

I have a 1962 Ford F100 with a 2016 Coyote engine with a Manual. Will this Intake fit on a 16 5.0?

Asked by: 62F100
The vendor has not provided any information regarding cross-fitments of this part to any other model then what is listed.
Answered by: rk cjpp
Date published: 2018-02-15
  • y_2020, m_1, d_28, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_PP133, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 168.18ms
  • QUESTIONS, PRODUCT