C4 Torque Converter 26 Spline 10 1/2" Bp "Sizzler" 1970

TCI:
450738
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 214.63ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • C4 Torque Converter
  • 26 Spline 10 1/2"
  • 300-400 RPM Increase In Stall
  • Quicker Acceleration
$268.99

C4 Torque Converter 26 Spline 10 1/2" Bp "Sizzler" 1970

C4 Torque Converter 26 Spline 10 1/2" Bp "Sizzler" 1970

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.77ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Will this work on my 06 gt mustang?

Asked by: Toog
No it will not.
Answered by: rk cjpp
Date published: 2019-05-05

Will this work on my 1974 c4 302 small bellhousing with 157t flexplate?

Asked by: RBarber85
This has a slightly higher stall speed than the stock converter. There are several things to consider when choosing a torque converter. I would suggest looking at this chart. http://www.tciauto.com/tc/stall-speed-chart
Answered by: rk cjpp
Date published: 2018-08-07

hooking up to c-4 1973 trans 1966mustang 289 with 347strocker need converter stall3000 it a26spline 10.5 thanks

Asked by: musmann
Here is the link, https://www.cjponyparts.com/bm-c4-2900-3300-stall-holeshot-torque-convertor-w10-1-2-inch-bolt-circle/p/ATC32/
Answered by: rk cjpp
Date published: 2017-11-02

Will it fit my 1964 C-4 Trans ...

Asked by: Wimp
No 24 spline count 1969 down this is a 26 spline count 
Answered by: 71Mav
Date published: 2017-05-31

Is this T/C a stock replacement and will it bolt up to a 157t flexplate

Asked by: jjarf150
This is not a stock replacement, it has a 10 1/2 bolt pattern.
Answered by: rk cjpp
Date published: 2017-05-31

Are torque converters new or rebuilt?

Asked by: Danny G 88
This would be new.
Answered by: rk cjpp
Date published: 2017-02-17

What is the stall on this converter

Asked by: Kiwidan
It is 1500-1700.
Answered by: rk cjpp
Date published: 2017-02-17

Will this work in my 68 mustang with a 302 hooked to a C4 trans and does it come in a 3500 stall?

Asked by: braydon98
Only if you have a C4 from 1970 or newer. This is for a 26 spline trans. Before 1970 they were 24 spline.
Answered by: Twins14
Date published: 2017-02-17
  • y_2020, m_1, d_19, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_ATC8, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 130.77ms
  • QUESTIONS, PRODUCT