Lokar Carburetor Bracket and Spring

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 122.28ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Works W/Most Popular Carbs
  • Polished Fittings
  • For Use With Aod Cable
  • Easy Installation

Lokar Carburetor Bracket and Spring to use with AOD Kickdown Cable.

Lokar's Carburetor Bracket and Spring are stainless brackets that mount to the rear of Holley, Edelbrock, AFB, Quadrajet and in-line dual quad carburetors. This carburetor bracket and dual spring set was designed to mount Lokar's throttle cable and kickdown assemblies for better use. Includes tension screw to prevent bracket from movement under extreme pressure on a kickdown cable and allen wrench to adjust the set screw.

Vehicle Fitment: This bracket and spring kit will fit Mustangs and Chevy C10s equipped with an AOD kickdown cable (sold separately).

For the very best in billet and stainless steel accessories and top quality performance equipment, CJ Pony Parts' customers can turn to Lokar. Lokar supplies CJ Pony Parts with the finest pieces of early model Ford functional dress-up equipment available, from parking brake and kick down cables to window cranks and pedal pads and assemblies and much more.

Be sure to purchase this brand-new Lokar SRK-4000 Carburetor Bracket and Spring for your vehicle equipped with an AOD Kickdown Cable now from CJ Pony Parts!

Vehicle Fitment

This product will fit the following C10 years:

  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,
  • 1980,
  • 1981,
  • 1982,
  • 1983,
  • 1984,
  • 1985,
  • 1986,
  • 1987,

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.04ms
  • bvseo-msg: HTTP status code of 404 was returned;

Is that product fit at an edelbrock carburator in a 66 mustang?

Asked by: Jeffriffel
For vehicle specific questions it is best to call 877-469-7440 or email tech@lokar.com .
Answered by: Lokar Tech
Date published: 2018-09-04

Will this work with a MSD EFI Four barrel carberator 

Asked by: nightime98
This bracket will not align the cable properly with the MSD EFI units.
Answered by: Lokar Tech
Date published: 2018-03-07

Will this work with an efi carb

Asked by: nightime9
Please call our Technical Department, we would have to ask you some questions, like: A. What carb EFI are you using and B. What Lokar part number are you looking at? Please call us we are happy to help you. Thank you, 877.469.7440.
Answered by: Lokar Tech
Date published: 2018-01-09

Checking to See if This Carburetor Bracket and Spring Kit Work/Fit on My 64.5 Coupe Which has the Following Setup....a 302, C4 Auto and a Holley 4-BBl Carb, and Edelbrock Air-Gap Intake Manifold.....

Asked by: MADSTANG65
If you purchase a DP-1000HT or DP-1000U, the "HT is for the High Tech Stainless Steel braided housing" and the U- is Lokar "Universal Standard Black housing." This kit will come with Return Springs, 24" of throttle Cable, and the bracket that will let you utilize both the Lokar Throttle cable and a Lokar Kick-Down Cable as well. Keep in mind you will have to adapt the Throttle Cable Clevis to your pedal or you could purchase a Lokar Direct Fit Throttle Pedal and that will bolt into the car and work with the Lokar Throttle cable. Thank you,
Answered by: Lokar Tech
Date published: 2019-02-21
  • y_2020, m_2, d_22, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_SRK4000, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 209.15ms