Carpet Underlayment Kit 4-Piece 1965-1973

CJ's Part Number: ULK3
CJ's Low Price:
1508544000 37561
Earn 65 RPM Points What's this?
Carpet Underlayment Kit 4-Piece 1965-1973
Carpet Underlayment Kit 4-Piece 1965-1973 Play Carpet Underlayment Kit 4-Piece 1965-1973 Video 1

Product Description

4-Piece Carpet Underlayment Kit for all 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

Save valuable time and money on your 1965-1973 Mustang's restoration with this fantastic reproduction 4-Piece Carpet Underlayment Kit from CJ Pony Parts!

Carpet Underlayment Kit Features and Benefits:
- Kit includes four pieces
- Insulates from heat/cold
- Reduces exterior noises
- Directly replaces factory originals
- Die cut precision for optimal fit
- Superior high-end reproduction quality
- Condensation resistant to avoid rusting

Drastically reduce frustrating exterior road noises while helping insulate your car from the heat and the cold with these amazing direct-fit underlayments. Unlike the original, these superior underlayments are going to resist frustrating condensation which causes unsightly and damaging rust. This kit is going to feature precision die cutting to correspond with the original patterns for an easy installation. You will find that new carpet will fit better with new underlayment installed, and your classic pony will be overall more comfortable no matter what the temperature is like outside!

4-Piece Kit Includes underlayment to cover the following:
- Left Footwell
- Right Footwell
- Trans Tunnel
- Rear Footwells
- Under Rear Seat
- Trunk Floor/Gas Tank

Whether you’re looking for an exterior mirror, wheels and tires, headlights and taillights or a set of interior upholstery, CJ’s has what you need to complete your classic Mustang restoration with ease! CJ Pony Parts has all the parts you need to bring your early model Mustang build back to life--browse our huge selection of restoration parts for your pony today!

Order a 4-Piece Carpet Underlayment Kit for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Carpet  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Carpet Underlayment Kit 4-Piece 1965-1973 is rated 3.4 out of 5 by 10.
Rated 3 out of 5 by from Packaging of product could be better. Product arrived as described, but it was rather difficult to unwrap from it's curled up state without damage. Also the packing could be a bit more solid as it tends to get VERY brittle in the cold and the shipper dropped the box (probably multiple times as it traveled) and resulted in broken edges up and down the underlayment. CJ was awesome in their response to the damage though. Shipped me another at no cost and a gift card for the trouble. Excellent vendor who stands by the products they sell!!!
Date published: 2015-01-09
Rated 1 out of 5 by from JUNK Would have been better off buying tar paper roof rolling than this excuse for styled underlayment. About a 1/3 of the original thickness with no jute/fibre membrane and not at all pre cut for a 1973 mustang. cj can and should do better. Tears easily and doesn't fit without multiple cuts and wasted trim.
Date published: 2015-05-16
Rated 5 out of 5 by from Heavy and work well These are very heavy. I set them out in the sun before installing and they molded right to the contours of the floor. Had to cut holes for the seat belts in the front, but overall happy with these.
Date published: 2015-01-09
Rated 4 out of 5 by from What the! I know it's been a while since I bought this underlayment but I finally got around to doing it.. I know.. life happens. Bought this for my 70 coupe and I just noticed the front piece was cut backwards.. oh well I guess that's what I paid for.. guess I'll just have to make the modifications myself.. thanks CJ
Date published: 2017-07-06
Rated 5 out of 5 by from Oem style Product is like oem. Set in warm sun if you can before working with materials. Can use heat gun for best lay down.
Date published: 2015-07-28
Rated 1 out of 5 by from Messy Material The mats come rolled in a box. Whe you take them out, the pads will crack and if you live in a hot area, the material will somehow melt. Not to mention the bad tar smell.
Date published: 2015-01-07
Rated 1 out of 5 by from Too small for 69 and 70. Dont waste your money This kit will not fit a 69 or 70 as advertised. It may fit a 65/66. It is way too short on each side. Seller stated it wasn't meant to be wall to wall. DUH. Quit stating it will fit if it wont. I would have used filler pieces but stock was not offered to resolve issue except for additional expense, which I refuse to do.
Date published: 2016-11-08
Rated 4 out of 5 by from Underlayment Little trimming required as I expected. Unroll the mat and place something on top for a couple of days if possible to allow it to lay flat upon installation. Looks similar to the factory mat.
Date published: 2017-05-16
  • y_2017, m_10, d_20, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_ULK3, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 143.37ms

Product Questions

Good morning, this part is right for a Mustang convertible 1967?

Asked by: renzob19071970
Yes it is.
Answered by: rk cjpp
Date published: 2016-08-31

Putting new ACC carpet in my 69 mach1.My underlayment has shiny /rubber side and other side is jute. Does the jute side go up or does the shiny rubber go up. Seems to fit better with the jute side down. Not sure which should go up. Have installed Dynama

Asked by: JRW69
The front underlayment is side specific, the right side is square cut at the toe board area where the left side has a cut out for the dimmer switch. Once you get the front figured out you will be able to see which side is up.
Answered by: rk cjpp
Date published: 2016-04-22

Should I cover the "entire" floor with another underlayment to keep our the most noise and sound. . . .. i e make my own fit 

Asked by: DavidL
That all depends how serious you want to get with it. This covers all of the key points and will work great by itself. But you could always pair this with another option for more sound deadening.
Answered by: CJPP Dave
Date published: 2016-03-18

Does it have adhesive or do I use a glue spray

Asked by: DavidL
It has a slightly adhesive backing that will keep it in place while you install your carpet. Check out the video above.
Answered by: CJPP Dave
Date published: 2016-03-18

Can I just use this under my carpet or will I need another product as well?

Asked by: jmasters
Nope, you're good with this.
Answered by: CJ Pony Parts
Date published: 2016-03-18

Is this as good as boom mat

Asked by: dirty
It's different, not better or worse. In fact, you could use both hand-in-hand to get maximum quietness in your Mustang.
Answered by: CJ Pony Parts
Date published: 2015-07-07
  • y_2017, m_10, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_ULK3, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 38.89ms

You Might Also Like

Product Video

Carpet Underlayment Kit 4-Piece 1965-1973 Video Transcript
By Bill Tumas: We’re here with an original style underlayment kit for your 1964 through 1973 Mustang. This underlayment kit is designed for '64 through '68 Mustangs, but will fit all '64 through '73’s. It's going to install in the floor of your Mustang before your carpet to deaden the outside noise. When installing underlayment into your Mustang, you want the shiny side to go down. You can actually pull the shiny backing off and it's got a slightly adhesive side here, but that's the side that faces down when installing.

We put the underlayment kit down on this floor to give you an idea roughly where the four pieces are going to fit. You'll have one front piece for your floor and seat platform, a set for the rear floor area, another piece for the rear seat area, and the last piece you're going to install on the top of your gas tank in the trunk.