CJ Classic Trucks Power Disc Brake Conversion Single 6-Lug Booster Front And Rear Kit Chevrolet C10 1967-1970

CJ's Part Number:
DBF323
Rating:
95% of 100

Highlights

  • Complete Kit!
  • Does Front and Rear Conversion
  • OEM-Style Brake Unit
  • Includes Needed Hardware
$1,383.99

CJ Classic Trucks 6-Lug Front and Rear Single Power Disc Brake Conversion Kit for all 1967, 1968, 1969 and 1970 Chevrolet C10s.

If you want to convert your 1967-1970 Chevrolet C10's power disc brakes, make sure you go for the easiest option with a complete CJ Classic Trucks 6-Lug Front and Rear Single Power Disc Brake Conversion Kit from CJ Pony Parts!

Features and Benefits:
- Complete kit
- Includes everything needed to convert to disc brakes
- Completes conversion for both front and rear ends
- OEM-style power brake unit
- 11-inch brake booster
- Stock-style master cylinder
- Includes necessary brackets and bearings
- 12-inch rotor with 6 x 5-1/2 inch bolt pattern

This Front and Rear Single Power Disc Brake Conversion Kit made by CJ Classic Trucks is comprised of many parts, all of which are listed below. Together these parts will allow you to convert to disc brakes on the front and rear brakes of your classic pick-up truck! Includes with this kit is an OEM-style power brake unit. This unit uses and 11-inch brake booster. It also conveniently comes with a stock-style master cylinder. This kit is ideal for rims that are 15 inches or longer thanks to its 6 x 5-1/2 inch bolt pattern. Installation is done completely by you thanks to the included necessary brackets and bearings.

Kit Includes:
- Forged Spindles
- GM Large Single Bore Calipers with Pads
- Caliper Brackets
- Backing Plates
- Rubber Brake Hoses and Banjo Bolts with Crush Washers
- Grease Seals, Bearings, and Dust Caps
- For use with 15-inch rims or larger
- Works with 6 x 5-1/2 inch Bolt Pattern
- 11-inch Dual Zinc Power Brake Booster
- Powder Coated Black Laser Cut Firewall Pedal
- Brake Linkage
- 1-1/8 inch Square Single Bail Master cylinder with Bleeder Screws
- Left Mount Proportioning Valve Kit Disc Drum
- Includes pre-bent lines and bracket
- Large GM Large Bore Single Piston Calipers with Self-Adjusting E-Brake (1979 Cadillac El Dorado)
- D54 Pads Included
- Caliper Brackets and Spacers
- Bracket Hardware
- Flex Hoses and Clips
- Emergency Brake Cables

Vehicle Fitment:
- 1967-1970 Chevrolet C10

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following C10 years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.