CJ Classics Electric Fan/ Aluminum Shroud For Scott Drake Aluminum Radiator Kit Mustang 1965-1966

Scott Drake:
87% of 100


  • Hi-Po Rated At 1650 CFM
  • Increased Air-Flow And Cooling
  • Superior Maximum Efficiency
  • 16" Spal W/10 Straight Blades
MSRP $445.00
You save 10%

CJ Classics Electric Fan and Aluminum Shroud Kit for 1965-1966 Mustangs with a Scott Drake Aluminum Radiator.

If you are sick and tired of your 1965-1966 Mustang overheating, especially at lower RPMs or ever when you are idling, then it's time to give your Pony some help by picking up this Electric Fan and Aluminum Shroud Kit C3DZ-8146/8600A from CJ Classics. The superior-quality upgrade will not only eliminate those annoying instances of overheating, but also provide a much cooler engine bay to let your vintage Pony get its best performance possible.

Features and Benefits:
- Designed to work with Scott Drake's 259 Series Aluminum 2-Row Radiators
- High-performance fan rated at 1650 CFM
- Strategically placed flaps at each corner
- Increased airflow and cooling capabilities
- Superior maximum efficiency
- Slight improvement to horsepower and fuel economy

CJ Classics manufactures this kit around a high performance, 16" Spal 10 straight-blade fan that is rated at 1650 CFM. The fan provides a superior-level performance in your classic 1965-1966 Mustang with an amp draw of 11 amps. Combined with the aluminum shroud in this kit, the fan has an overall thickness of 3-1/4 inches. Designed to work with their own 259 series aluminum 2-row radiators, CJ Classics also includes a wiring harness, relay, and an adjustable thermostatic switch, which aptly mounts to the shroud with the help of powder-coated brackets.

- 16" spal 10 straight-blade fan
- Aluminum shroud
- Wiring harness
- Relay
- Adjustable thermostatic switch
- Powder-coated brackets

CJ Classics' Electric Fan and Aluminum Shroud Kit C3DZ-8146/8600A will fit perfectly in your 1965-1966 Mustang's engine bay, so the fan can draw all of the air from the radiator for an upgrade in the cooling capabilities underneath your hood. CJ Classics places pass-through flaps that are strategically designed in each corner to make for an increase in overall airflow for the maximum amount of efficiency. Also, just removing your stock fan reduces the overall rotational mass, which will result in an improvement in your Mustang's horsepower and fuel efficiency.

Tech Tip: Although this CJ Classics Electric Fan and Aluminum Shroud Kit are designed to work with Scott Drake's 259 Series Aluminum 2-Row Radiators, mounting holes may need to be drilled in the shroud to properly install the necessary brackets.

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We’re here with a Scott Drake Electric Fan and Shroud Kit fitting your 1965 through 1966 Mustang.

As Scott Drake developed this Fan and Shroud Kit specifically to work with their 2-Row Radiator also available here at CJ Pony Parts. The basis of the set up is going to be this aluminum shroud with this spal 16 inch, 10 blade fan in the middle. The fan is going to flow 1650 CFM. It includes all necessary power wires, relays, as well as an adjusting thermostatic control for installation. The thermostat is going to install into your 2-Row '65 through '66 Scott Drake Radiator, and the control here will allow you to dial in the temperature at which the fan turns on.

While if modifications this fan may be used on other applications, it is designed specifically to work only with the Scott Drake 2-Row Radiator.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Complete Your Package
Add to Cart