CJ Classics Front Bumper Chrome 1971-1972

CJ's Part Number:
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 116.67ms
  • bvseo-msg: HTTP status code of 404 was returned;


  • Chrome Plated Finish
  • Steel Construction
  • Prestamped Bumper Bolt Holes
  • OEM Style Replacement
MSRP $118.99
You save 8%

CJ Classics Chrome Front Bumper for 1971-1972 Mustangs.

ThisCJ Classics front bumper is an OEM-style direct-fit replacement for all 1971-1972 Mustangs. If the factory original front bumper on your vintage pony is rusted, missing or beat-up, than this Chrome Front Bumper exactly what you need! The beautiful chrome-plated finish is attractive but will also bring back that original factory style to your classic pony’s exterior.

This front bumper is constructed with triple chrome-plated steel and has the mounting holes drilled in the original locations already so it is ready to install. Re-chroming your factory original bumper can be expensive--save time and money on your restoration and order a new OEM-style replacement front bumper today!

*Mounting hardware is not included.

If you’re working hard to restore your vintage Ford Mustang, than your go-to source for the best replacement and reproduction parts is already CJ Pony Parts! CJ’s is proud to offer our own high-quality brand, CJ Classics, to help meet all of your repair needs. You’ll get OE-style, direct-fit reproduction parts for practically any pony project you can think of—browse around and purchase your parts and hardware now from CJ’s!

Order a new CJ Classics Chrome Front Bumper for your classic 1971-1972 Mustang from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.06ms
  • bvseo-msg: HTTP status code of 404 was returned;

Would this bumper B4F. Fit a 1971-1973 mustang?

Asked by: fankie
This bumper fits 71-72 mustangs.
Answered by: rk cjpp
Date published: 2019-05-08

Do you have the bumper made of rubber

Asked by: Ruben
Sorry we do not offer the urethane bumper.
Answered by: rk cjpp
Date published: 2019-04-08

Will this fit on a 1973 Mustang convertible?

Asked by: Cyclops
Answered by: CJPP Dave
Date published: 2018-07-16

Is the lot kit all I need to attach the front bumper of a 1972 Mach 1 mustang?

Asked by: Bspaz
You may also need this, http://www.cjponyparts.com/bumper-front-chrome-1971-1972/p/HW3094/
Answered by: rk cjpp
Date published: 2017-08-21

Will this bumper has the same lenght as the fastback mustang 73? Thanks

Asked by: 80Braulio80
This is the same size as the OEM bumper.
Answered by: rk cjpp
Date published: 2016-08-31

Will this front bumper off 1972 fit a 1973 grande mustang 

Asked by: Raymac
Most likely not - Ford redesigned the bumpers for 1973 to be stronger and safer in a collision, so the mounting points aren't the same between model years.
Answered by: CJ Pony Parts
Date published: 2017-10-05

plase how much is the shiping of this ítem to (Madrid-Spai???) thank you

Asked by: FELIX
To calculate shipping, please add your product(s) to your shopping cart. Proceed to checkout, where you can see all of your shipping options once you fill in your billing/shipping addresses.
Answered by: CJ Pony Parts
Date published: 2015-04-11

please, how much cost , the shiping from ¨MADRID_SPAIN ? thak you.- (The bumper front for mustang MACH ONE, of 1971

To calculate shipping costs, add your parts to your shipping cart, then proceed to checkout. In checkout, fill out your full billing and shipping address info and you'll see all of your shipping options, with accurate costs.
Answered by: CJ Pony Parts
Date published: 2015-01-26
  • y_2020, m_1, d_20, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_B4F, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 32.56ms