CJ Classics Leaf Springs 5-Leaf Stock Height Pair 1965-1973

CJ's Part Number:
LS3
CJ Classics Leaf Springs 5-Leaf Stock Height Pair 1965-1973 is rated 4.8 out of 5 by 5.
  • y_2020, m_4, d_8, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_LS3, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 135.3ms
  • REVIEWS, PRODUCT
MSRP $229.90
$209.99
You save 9%

Pair of CJ Classics 5-Leaf Stock Height Leaf Springs for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs.

Upgrade the handling performance of your 1965-1973 Mustang with these high-performance 5-leaf rear springs, from CJ Classics! They offer superior road handling over standard 4-leaf designs. These springs also help prevent wheel hop and spring wrap up on hard acceleration. Painted steel-gray to closely resemble OEM appearance and to provide a nice contrast compared to traditional black replacements, these new springs feature a 195 lb load rate. What are you waiting for? Pick up your new leaf springs now from CJ's!

*Also available as a mid-eye mount that lowers your Mustang approximately 1"

If you’re working hard to restore your vintage Ford Mustang, than your go-to source for the best replacement and reproduction parts is already CJ Pony Parts! CJ’s is proud to offer our own high-quality brand, CJ Classics, to help meet all of your repair needs. You’ll get OE-style, direct-fit reproduction parts for practically any pony project you can think of—browse around and purchase your parts and hardware now from CJ’s!

Go ahead and purchase this brand-new Pair of CJ Classics 5-Leaf Stock Height Leaf Springs for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang now from CJ Pony Parts!

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Great ! When I remove the jack car was still high but in fact with bad leaf spring you don’t notice car is getting down but now I can use back seat without bumping exhausts on the road. And most important, driving on curves is really improved.
Date published: 2019-09-28
Rated 5 out of 5 by from Worth every penny! These leaf springs are a must for older cars that experience sagging. It raised my car almost 3 inches and gave it an aggressive stance. These are much thicker and heavier than the stock leafs and are well worth the price.
Date published: 2016-09-01
Rated 5 out of 5 by from Right height I replaced the leaf springs 25 years ago with the standard 4 leaf. These raised the car 1.5 inches. Somewhat stiffer ride but not bad. Nice finish on them but were stratched during delivery.
Date published: 2016-07-23
Rated 5 out of 5 by from Worked as intended Brought my rear end up where it is supposed to be. Stiffer "sporty" ride but not overly so. Glad I went with the 5 leaf springs.
Date published: 2016-05-02
Rated 4 out of 5 by from Installation issue The front bushing sleeves are a bit too wide, so I had to grind them to install them. These 5-leaf springs are great for performance driving!
Date published: 2020-01-16
  • y_2020, m_4, d_8, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_LS3, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.27ms
  • REVIEWS, PRODUCT

Do these leaf springs come w/ new bushings?

Asked by: larose
The front eyelets have the bushings installed. The rear eyelets do not include the bushings.
Answered by: rk cjpp
Date published: 2019-06-09

Have stock 4 leaf on 66 / 289 coupe. Gone soft. Would like to raise vehicle 1 inch at rear as exhaust hits on some roads What do I need. Also need u bolts, bushes etc.

Asked by: storky
Your existing springs are probably just worn out. You could use either the LSK1 kit or the LSK4 which would be an upgrade over the 4 leaf kit.
Answered by: rk cjpp
Date published: 2018-09-28

thinking about putting the stock highth 5 leaf spring on my 68 mustang.needing to know witch coil spring would be best to go with. do not want to lower it at all. 302 motor

Asked by: Andy
You could use these. https://www.cjponyparts.com/coil-spring-68-70-302351-69-70-boss-302-1968-1970/p/CS8534/
Answered by: rk cjpp
Date published: 2018-04-06

I would like to raise my 65 up one to two inches over stock in the rear without resorting to the use of air shocks. I want an aggressive stance. Do you recommend these springs for that kind of an application or do you have a set that is better suited?

Asked by: john
All the springs we offer are either stock height or lowering springs. If your car has the original springs they could be sagging which a set of new springs may get the car higher in the rear.
Answered by: rk cjpp
Date published: 2018-01-19

Do you still offer leaf springs for a 1973 mustang that gives you a slightly higher than stock ride height? In the past I saw these being offered. Thanks, Mike L

Asked by: MikeL140
No we do not.
Answered by: rk cjpp
Date published: 2017-05-12

What is the spring rate on these leaf springs? thanks Peter

Asked by: 68Hildago
195 lbs
Answered by: Rick CJs
Date published: 2016-09-22

Do these springs have stock size spring eyes? I have global west Del- a-lum bushings that fit factory size springs 

Asked by: WG66
Yes they do.
Answered by: Rick CJs
Date published: 2016-08-03

I am seeking new leaf springs to replace the existing springs on my 1968 Shelby GT500. I want the new ones to possess all of the performance strengths of the originals and retain a stock ride height. Which springs do you recommend? Thanks!

Asked by: ShelbyCobra
Though we do not offer a specific Shelby gt500 spring the stock springs were 4 leaf heavy duty springs, this 5 leaf would be the closest that we offer.
Answered by: rk cjpp
Date published: 2016-09-04
  • y_2020, m_4, d_8, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.5
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_LS3, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 277.25ms
  • QUESTIONS, PRODUCT