Classic Auto Air Perfect Fit Elite Air Conditioning System With Uncoated Compressor R-134A 1969-1970

Classic Auto Air:
20-185
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 127.37ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • Complete Kit
  • Easy Installation
  • Fits 1969-1970 Mustangs
  • R-134A A/C Kit
MSRP $1,799.95
$1,524.99
You save 15%

Classic Auto Air R-134A Perfect Fit Elite Air Conditioning System with an Uncoated Compressor for all 1969-1970 Mustangs.

Provide your vintage 1969-1970 with a significant, yet simple upgrade by ordering Classic Auto Air's R-134A Perfect Fit Elite Air Conditioning System with an Uncoated Compressor. This system will upgrade your Pony's performance and reliability, while keeping its original factory look.

Classic Auto Air's Perfect Fit ELITE model specific systems are not your typical, one-size-fits-all, low-quality, aftermarket air conditioning system. Every component was chosen for its superior design and quality rather than low cost. Classic Auto Air's RETROFIT designs give OE quality combined with better than original performance and reliability.

Included Components:
- All Interior Components
- Evaporator Assembly
- Condenser Kit Including Pre-Engineered Condenser Mounting
- Pre-Crimped Refrigeration Hoses
- Sanden-Style Compressor with Uncoated Finish
- Hi-Low Refrigerant Pressure Switch
- Aluminum Hookup Tubes
- Compressor Mounting Hardware
- Installation Instructions & Mounting Templates

This model specific Perfect Fit ELITE system allows you to retrofit an original, standard, heat-only 1969-1970 Mustang with full air-conditioning. Engineered specifically to use the original 1969-1970 Mustang heater controls and dash louvers while providing you with powerful air conditioning, heat on the floor, and dehumidified defrost. The air conditioning and defrost connect to the original heater-defrost diffusers.

The Perfect Fit ELITE 1969-1970 Mustang air conditioning system is engineered to actually fit a 1969-1970 Mustang. It comes equipped with carefully sized, large, separate air conditioning and heat coils just like factory OE systems, not combined air conditioning/heat coils often found on aftermarket systems. The separate coils improve the cooling and heating capacity of the total system.

The 1969-1970 Mustang Perfect Fit ELITE air conditioning system is designed specifically to bolt into your 1969-1970 Mustang with minimal modification to your vehicle. Each kit comes with detailed, easy-to-follow installation instructions and mounting template.

Please note: Classic Auto Air's Air Conditioning Systems are custom made to your specific application and are not returnable. Please allow 3-5 weeks for delivery.

*Requires the use of R-134A air conditioning refrigerant.

When you purchase a Classic Auto Air system, you are getting almost 40 years of real world, high-tech, cooling technology. Check out the wide arrange of Classic Auto Air products that are offered from CJ Pony Parts.

Purchase Classic Auto Air's R-134A Perfect Fit Elite Air Conditioning System with an Uncoated Compressor for your 1969-1970 Mustang from CJ Pony Parts today!

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.13ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Can the Original heater box in a non a/c 70 mustang be removed when this kit is installed, i read the online instructions on this page but did not see any info on that.

Asked by: 1970Stang
This replaces the original heater box.
Answered by: rk cjpp
Date published: 2019-08-14

Will this fit with the borgeson power steering kit installed on 1970 mustang with 351w? ...will the pump be in the way of the compressor?

Asked by: Buc1313
The borgeson pump comes with different length bracket spacers for a/c.
Answered by: rk cjpp
Date published: 2019-06-10

Is it possible to buy the dash vents separately?

Asked by: Scott
No.
Answered by: jmg1
Date published: 2018-12-05

Will this kit be suitable for a 1969 Mustang that has been converted to right hand drive ?

Asked by: Hot pony
Unfortunately I cannot accurately answer your question. Without the vendor supplying any information regarding fitment for non-US Spec cars and CJ's not having a car to test parts on, we cannot confirm this part working on your vehicle at this time.
Answered by: rk cjpp
Date published: 2018-11-23

Do I need to get an electric fan to use with this system. Is it recommended?

Asked by: RHMBoss
It is advisable to use an electric fan with this system.
Answered by: jmg1
Date published: 2018-11-09

How many row radiator should be used for this application. I am installing a 86 302 motor and need a radiator. I want to be sure I get one big enough to handle a/c system.

Asked by: fruitloops
At least a 3 row.
Answered by: rk cjpp
Date published: 2019-02-12

I have a 1969 Grande 351W that never had factory air. Will this unit work in my Mustang and does it complete with everything I will need to install it including instructions

Asked by: KenHunk
This will fit for your application, Use the drop down menu's under the price to select the options.
Answered by: rk cjpp
Date published: 2016-09-27

Does this a/c kit come with the center and outer a/c registers the mount in the dash panel?

Asked by: ruby69
Yes it does come with the registers.
Answered by: rk cjpp
Date published: 2016-09-09
  • y_2019, m_10, d_21, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_CAA20185, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 133.51ms
  • QUESTIONS, PRODUCT