Classic Instruments 6-Gauge Set All American Nickle With Classic Dash 6-Hole Instrument Bezel 1965-1966
Classic Instruments All American Nickle 6-Gauge Set with a Classic Dash 6-Hole Instrument Bezel for 1965-1966 Mustangs.
CJ Pony Parts offers this Classic Instruments All American Nickle 6-Gauge Set with a Classic Dash 6-Hole Instrument Bezel for your 1965-1966 Mustang. Thanks to the direct-fit replacement designs, these parts won't require any modifications to your interior for installation. You can choose between three finishes for the bezel to match your style.
All American Nickle Features:
- 12 Volt Electronic
- Curved Glass
- Polished Stainless Steel Radial Bezels
- Red Pointers
Each All American Nickle gauge features a raised wing emblem and curved glass that flows into the smooth contour of a polished stainless steel radial bezel. The numbers and text are clearly printed in black and red pointers keep you aware of your levels while driving. The included speedometer goes up to 140 MPH, and the tachometer ends at 8,000 RPM. Each is measured at 3-3/8" while the fuel level, oil pressure, water temperature and volt gauges are 2-1/16-inches. An oil temperature sending unit and water temperature sending unit is included with this set, while the fuel gauge is designed to work with your factory 75-10 ohm fuel sender.
Classic Instruments' Gauges Included:
- 3-3/8" 140 MPH Speedometer
- 3-3/8" 8,000 RPM Tachometer
- 2-1/8" Fuel Level 75-10 ohm Fuel Sender
- 2-1/8" Oil Pressure
- 2-1/8" Water Temperature
- 2-1/8" Volt Gauge
Classic Dash Bezel Features:
- 5/32" UV-Resistant ABS Composite
- Finishes: Black, Brushed Aluminum or Carbon Fiber
- 6-Hole Design Fits Most Aftermarket Gauges
- Two 3-3/8" Holes for Speedometer/Tachometer
- Four 2-1/16" Holes for Additional Gauges
- Made in the U.S.A.
- Fits 1965-1966 Ford Mustangs
Classic Dash's instrument bezel will fit perfectly into your Mustang's dash. It's made from 5/32" thick ABS composite that is treated to resist fading caused by sun exposure. You can choose between a black, brushed aluminum and carbon fiber finish to match your individual style and interior. The bezel features six holes cut to fit most aftermarket gauges, so if you ever want to switch out, you don't have to replace the bezel. Classic Dash proudly manufactures their products in the U.S.A. for quality assurance.
Please Note: Speedometer sending unit for electronic gauges (HW3360) and bezel mounting hardware (F1057) are not included and must be purchased separately.
Order this Classic Instruments All American Nickle 6-Gauge Set with a Classic Dash 6-Hole Instrument Bezel for your 1965 or 1966 Mustang from CJ Pony Parts today!