Classic Performance Products Big Brake Kit Front/Rear With Drilled/Slotted Rotors For 5x5 Lug Pattern Chevrolet C10 1967-1970
- Drilled And Slotted Rotors
- 5X5 Lug Pattern
- Big Brake Kit
- 2-1/2" Drop Spindles
Classic Performance Products Front and Rear Big Break Kit with Drilled and Slotted Rotors for 1967, 1968, 1969 and 1970 Chevrolet C10s with a 5x5 Lug Pattern.
Your 1967-1970 Chevy C10 has seen many miles on highways and dirt roads. It's time to show it some love by upgrading the brakes with this Front and Rear Big Brake Kit from Classic Performance Products (P/N: 6770FRBK5-BB). This kit comes with everything you need to completely replace your front and rear brakes and enhance your braking capacity.
Brake Kit Features and Benefits:
- Upgrades Front and Rear Brakes
- Large Brake Pad Surface
- Improves Braking
- Fits 5x5 Lug Pattern
- Fits 1967-1970 Chevrolet C10s
Please Note: Kits are all original drum offset. This Big brake kit requires the use of a 17” wheel or larger.
Brake Kit Includes:
- Zinc Washed 13" Front Rotors
- Zinc Washed 12" Rear Rotors
- 2024 T6 Billet Aluminum Hubs
- Modular 2.5" Drop Spindles
- PBR C15 Front Calipers with 52mm Twin Pistons
- Lincoln E-Brake Style Rear Calipers with Single Piston
- Hoses, Front Bearings and Seals
- Front and Rear Mounting Brackets
- Rear Hard Lines and E-Brake Cables
- 4-Wheel Disc Master Cylinder and Proportioning Valve Kit
- All Necessary Installation Hardware
Classic Performance Products' Big Brake Kit upgrades both your front and rear brakes and improves your braking capacity dramatically. It uses a 13" cross-drilled, gas slotted and zinc washed rotors mounted to a 2024 T6 billet aluminum CNC machined anodized hub in the front. A PBR C15 Caliper with 52mm twin pistons attaches to the 2.5" modular drop spindle with custom mounting brackets manufactured by Classic Performance Products. Because the calipers feature a large brake pad surface area, it offers approximately 60% more stopping power than the popular C5 calipers; it is also half the cost! The rear kit uses a 12" rotor and Lincoln (e-brake style) caliper.
The package (P/N: 6770FRBK5-BB) also includes hoses, front bearings, seals hard lines, e-brake cables and all of the necessary installation hardware. Included for your convenience is a 4-wheel disc master cylinder and proportioning valve kit. A 17" diameter disc brake type wheel with a 5 x 5 lug pattern is required for use of this kit.
Brake Pad Replacement:
- Front Calipers: D785 Brake Pads
- Rear Calipers: D347 Brake Pads
Order this Classic Performance Products Front and Rear Big Break Kit with Drilled and Slotted Rotors for your 1967, 1968, 1969 or 1970 Chevrolet C10 with a 5x5 Lug Pattern from CJ Pony Parts today!
This product will fit the following C10 years: