Classic Performance Products Street-Trac Traction Bars Pair 1965-1973 With Stock Rear End And Reverse Eye Leaf Springs

When cornering or tackling on-road obstacles, your 1965-1973 Mustang needs all the help it can get! If your Mustang features reverse eye leaf springs, then upgrade its suspension today with this Pair of Classic Performance Products Street-Trac Traction Bars (6473TB-R) from CJ Pony Parts!

Features and Benefits:
- For Stock Rear End Applications with reverse eye leaf springs
- D-spec Bushings
- Offers Additional Ground Clearance
- Reduces Stress on the Leaf Springs

This Pair of Street-Trac Traction Bars (6473TB-R) produced by Classic Performance Products are built from 1” 0.156-wall 4130 with 3/16” laser-cut bent-steel mounts. They also use self-lubricating plastic D-type bushings and 3/4" rod ends. If your Mustang maintains a forward-slanted approach angle, then this is just the product for you! The front mount features additional ground clearance in this case, so if your Mustang happens to make contact with an on-road obstacle, the angle approach will behave like a skid plate and the car will lift itself over the obstacle.

These traction bars (6473TB-R) will help to diminish stress on the top of the leaf spring because the section of the linkage that contacts the spring is a wider flat surface. CPP repositions the pivot stances to enhance weight transfer while slashing the spring load. Keep in mind that this pair of traction bars are intended for use on Mustangs with stock rear end applications with reverse eye leaf springs.

Vehicle Fitment:
- 1965-1973 Mustang