Classic Tube Brake Line Kit Complete Stainless Steel Boss 429 1969

Classic Tube: MU1027-SS
MSRP: $135.95
CJ's Low Price:
1508198400 26670
Earn 129 RPM Points What's this?
Classic Tube Brake Line Kit Complete Stainless Steel Boss 429 1969
Classic Tube

Product Description

Classic Tube Complete Stainless Steel Brake Line Kit for 1969 Boss 429 Mustangs.

Are you interested in replacing your damaged brake lines on your 1969 Boss 429 Mustang? If so are you might be interested in this complete brake line kit from Classic Tube. This Classic Tube Complete Brake Line Kit is a direct replacement for all 1969 Boss 429 Mustangs. Classic Tube provides all the necessary brake lines to properly restore the brake system on your 1969 Mustang.

Kit Includes:
- Driver Side Front Brake Line
- Passenger Side Front Brake Line
- Master Cylinder Brake Lines
- Intermediate Brake Line
- Rear Axle Brake Lines

Material Options:
- Original Steel
- Stainless Steel

Please Note: For shipping reasons Classic Tube pre-bent the larger brake line to cut down on freight cost.

Classic Tube offers two different material options for the brake line kit. The Original Steel Brake Lines will give your Mustang a factory original look. While the Stainless Steel lines won't rust or corrode. Each Brake Line is bent to ensure that the fit and finish is correct for your Mustang. This allows you to route and install the brake lines with ease. On each end of the brake line, the correct brake line fitting is installed. Once the brake line fitting is installed Classic Tube double flares the end of the brake line for a leak free seal.

There are lots of fluids in your Mustang. From gasoline, engine oil, steering fluid, antifreeze and more, there's lots of liquid moving around your engine bay. Allowing these fluids to do their jobs requires the proper tubing. No one makes more tubes for your Mustang than Classic Tube. CJ Pony Parts offers hundreds of tubes from Classic Tube, so you easily find exactly what you need for any job.

Order a new Classic Tube Complete Brake Line Kit for 1969 Boss 429 Mustang from CJ Pony Parts today!


Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 126.32ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

Hi, I'm just double checking that this is the complete brake line kit. The picture only shows two lines and none of the small lines at the master cylinder and proportioning valve or the rear end brake lines

Asked by: Rob Streets
Thank you for bringing this to our attention. This is a complete kit, we our working on getting the image updated.
Answered by: CJPP Dave
Date published: 2016-03-14
  • y_2017, m_10, d_16, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_MU1027S, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 141.85ms

You Might Also Like