COBB A-Pillar Mount For Accessport V3 Fiesta ST 2014-2017

COBB: FST-PC-804253
CJ's Low Price:
1508198400 50340
Let everyone know why you have this A-Pillar Mount and that what it's holding can unleash completely new levels of power for your Fiesta ST!
CJ's Low Price:
Earn 64 RPM Points What's this?
COBB A-Pillar Mount For Accessport V3 Fiesta ST 2014-2017
COBB A-Pillar Mount For Accessport V3 Fiesta ST 2014-2017 COBB A-Pillar Mount For Accessport V3 Fiesta ST 2014-2017 COBB A-Pillar Mount For Accessport V3 Fiesta ST 2014-2017 COBB A-Pillar Mount For Accessport V3 Fiesta ST 2014-2017 COBB A-Pillar Mount For Accessport V3 Fiesta ST 2014-2017

Product Description

COBB Accessport V3 A-Pillar Mount for all 2014, 2015, 2016 and 2017 Fiesta STs.

Find a fixed position for your COBB's Accessport V3 in your 2014-2017 Fiesta ST with COBB's new A-Pillar Mount (FST-PC-804253). The ProClip mount keeps your Accessport V3 in site so you can use the digital display to its full potential without causing you to take your eyes off the road.

COBB A-Pillar Mount Features:
- Includes swivel and mount
- Keeps your Accessport V3 in view and within reach of the driver's seat
- Made of high grade ABS plastic
- Quick and simple installation
- No damage caused by proper installation

Looking for a permanent spot for your Accessport V3? This A-pillar mount is the perfect home for your tuner. By using the A-pillar for a mounting point, the Accessport V3 is kept in sight but  is tucked out of the way so you don't lose any valuable interior space. A swivel allows you to set the angle of the Accessport for optimal viewing. The mount is constructed from high grade ABS plastic so your tuner will stay in place while you rip around the turns.

The mount uses the spaces between the panels so installation doesn't require dismantling of the interior. With no interior disassembling required, no damage will be caused as long as the mount is installed properly. This quick and easy install will have you viewing the data on your Accessport V3 in no time at all.

*This mount only fits the left side of the car and will only be useful for 2014-2017 USA Fiesta ST models.

Order the COBB (FST-PC-804253) A-Pillar Mount for COBB's Accessport V3 for your 2014, 2015, 2016 or 2017 Fiesta ST from CJ Pony Parts today! 

Similar Fiesta Parts

similar Fiesta parts More Tuning Devices  

Installation Instructions

Mustang Installation

Fiesta Applications

This product will fit the following Fiesta years:

Product Reviews

Write a review
COBB A-Pillar Mount For Accessport V3 Fiesta ST 2014-2017 is rated 4.7 out of 5 by 11.
Rated 5 out of 5 by from Works fine for me. Someone else commented that it was unreadable due to the angle and hitting the vent; Did you even attempt to move it up on the A-Piller? Some how I doubt it. If you install it higher on the A-Pillar it fits just fine and adjust to any eye level. Don't knock a product until you try every option. There's no problem with the A-Piller mount what-so-ever.
Date published: 2015-04-23
Rated 5 out of 5 by from NEAT item! Got this with the Stage 3 Accessport and REM! It installed nicely, BUT, after reading of Accessports getting STOLEN, I have this mount in the car, but only take the Accessport along with me to use as 6 digital gauges! When parked, the Accessport EASILY slips out!
Date published: 2015-01-08
Rated 5 out of 5 by from Best Accesport Mount I didn't like my Accesport mounted up high on the windshield or too low. This is the perfect level. Visibility is great, and it doesn't interfere with the functionality of the air vent at all. The mount looks very clean and allows you to mount up the accessport without clutter. Very happy with the purchase!
Date published: 2016-05-26
Rated 5 out of 5 by from Excellent mounting solution Perfect location for visibility and well constructed. Cable can easily be run next to wheel and kept tidy under the kickpanel. Does not interfere with the vent. I mounted the clip as far inboard as possible on the backing plate. I hesitated due to the cost, but it is clearly the best option.
Date published: 2017-01-29
Rated 5 out of 5 by from This mount is very satisfying. It holds the access port securely above the driver's side air vent and I have excellent visibility to my 6-value display. Much better than trying to rely on the sticky tape. It fits perfectly and looks like it came with the car.
Date published: 2016-05-24
Rated 4 out of 5 by from Perfect mounting solution My only complaint is this thing is expensive. Fit is perfect and seems pretty solid. Placement is perfect for eyesight line when driving. I am tall and it sits high enough to not have the cable touch my knee.
Date published: 2017-08-25
Rated 5 out of 5 by from Simple To Install Bought this because the adhesive pads for the standard mount kept failing in the cold winter weather. So happy I did, super simple installation, very secure mounting, perfect placement in the vehicle.
Date published: 2016-04-14
Rated 5 out of 5 by from Great purchase Very happy with this, I wish I bought it sooner it's a clean setup and so much better than attaching with double sided tape
Date published: 2017-08-31
  • y_2017, m_10, d_15, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_11
  • loc_en_US, sid_FSTPC804253, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 7.74ms

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 113.12ms
  • bvseo-msg: HTTP status code of 404 was returned;

You Might Also Like