COMP Cams Camshaft Set Dual Energy 255DEH Hydraulic Flat Tappet 1000-5500 RPM 289/302
COMP Cams Dual Energy 255DEH Hydraulic Flat Tappet Camshaft Set with a 1000 to 5500 RPM Range for Mustangs with a 289 or 302 Engine.
This hydraulic flat tappet camshaft will fit Ford 289 and 302 engines from 1963-1995.
The Dual Energy 255DEH camshaft provides excellent low-end horsepower and good torque with a smooth idle. This camshaft has good mileage capabilities.
- RPM Range: 1000 to 5500
- Valve Timing: 0.006
- Lobe separation (degrees): 110
- Intake Centerline (degrees): 106
- Valve Lash: Hydraulic
- Duration: Intake 255/Exhaust 263
- Duration @ .050" Lift: Intake 203/Exhaust 216
- Valve Lift: Intake 0.434/Exhaust 0.467
- Lobe Lift: Intake 0.271/Exhaust 0.292
- Camshaft (314163) Only
- Camshaft (314163) and Lifters
- Small Kit - Camshaft (314163), Lifters, Timing Chain Set and Assembly Lube
- Complete Kit - Everything in Small Kit plus Valve Springs, Valve Spring Retainers, Valve Locks and Valve Stem Seals
This product will fit the following Bronco years:
This product will fit the following F-100 years:
This product will fit the following Mustang years: