COMP Cams Camshaft Set High Energy 240H Hydraulic Flat Tappet 800-4500 RPM 289/302
COMP Cams High Energy 240H Hydraulic Flat Tappet Camshaft Set with a 800 to 4500 RPM Range for Mustangs with a 289 or 302 Engine.
This hydraulic flat tappet camshaft will fit Ford 289 and 302 engines from 1963-1995.
This camshaft is best suited for a 289 engine with an automatic transmission and stock gears. The High Energy 240H camshaft provides good torque and economy characteristics, with a very smooth idle.
- RPM Range: 800 to 4500
- Valve Timing: 0.012
- Lobe separation (degrees): 108
- Intake Centerline (degrees): 108
- Valve Lash: Hydraulic
- Duration: Intake 240/Exhaust 248
- Duration @ .050" Lift: Intake 192/Exhaust 200
- Valve Lift: Intake 0.416/Exhaust 0.416
- Lobe Lift: Intake 0.26/Exhaust 0.26
- Camshaft (311154) Only
- Camshaft (311154) and Lifters
- Small Kit - Camshaft (311154), Lifters, Timing Chain Set and Assembly Lube
- Complete Kit - Everything in Small Kit Plus Valve Springs, Valve Spring Retainers, Valve Locks and Valve Stem Seals
This product will fit the following Bronco years:
This product will fit the following F-100 years:
This product will fit the following Mustang years: