COMP Cams Roller Rocker Arm Magnum 3/8" Stud 1.7 Ratio Set 289/302/351W 1968-1969

COMP Cams:
1450-16
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 143.49ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Highlights

  • 1.7 Ratio 3/8" Stud
  • Magnum Roller Rocker Arms
  • 1968-1969 Mustangs
  • 289, 302 Or 351W Engine
MSRP $205.33
$184.80
You save 10%

Set of COMP Cams 1.7 Ratio 3/8" Stud Magnum Roller Rocker Arms for 1968-1969 Mustangs with a 289, 302 or 351W Engine.

These Magnum Roller Rocker Arms for Ford V8 289-302-351W (Rail Type) 1968-89 applications are the ultimate street rocker. With a 3/8" stud diameter and 1.7 ratio, they are designed for serious performance enthusiasts.

All Magnum Roller Rocker Arms are constructed from 8620 chromemoly steel, which is a superior material that will not flex and assures maximum lift. Their roller tip reduces friction, while stiff design and superior ratio accuracy yield more effective valve lift.

With a 15 to 30 horsepower increase over other rocker arms, Magnum Roller Rockers are perfect for performance applications with less than 350 lbs. open spring pressure. Don't accept inferior products or cheap knock-offs, look for the COMP Cams logo stamped into the underside of every Magnum Rocker.

*Sold in a set of 16.

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.77ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Are these only for a rail type or can they be mounted on a stud.

Asked by: johnnystang
These are for stud mounting.
Answered by: rk cjpp
Date published: 2016-07-05
  • y_2019, m_9, d_17, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_145016, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 166.4ms
  • QUESTIONS, PRODUCT