Corsa Axle-Back Exhaust System 2-1/2" Sport Dual Exit With 3-1/2" Polished Tips Jeep Wrangler JK 2007-2018
Corsa 2-1/2" Dual Exit Sport Axle-Back Exhaust System with 3-1/2" Polished Tips for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Enhance the power and performance of your 2007-2018 Jeep Wrangler JK with this 2-1/2" Dual Exit Sport Axle-Back Exhaust System with 3-1/2" Polished Tips from Corsa. This kit will also add an aggressive exhaust sound to your JK!
Features and Benefits of the Corsa 2-1/2" Dual Exit Sport Axle-Back Exhaust System with 3-1/2" Polished Tips (24412):
- Adds estimated +7 horsepower / +5 torque / +44% flow increase
- Constructed from premium stainless steel
- Adds aggressive exhaust tone
- Eliminates exhaust drone with RSC technology
- Easy bolt-on installation
- No welding required
- Comes with all hardware
- Proudly designed, engineered and crafted in the USA
This exhaust kit provides serious horsepower, torque and airflow gains. It is manufactured in the USA out of high-grade stainless steel. It will add an aggressive exhaust note while eliminating drone thanks to Corsa's Reflective Sound Cancellation (RSC) Technology. Every Corsa Performance exhaust system takes into account OEM design, desired performance output as well as interactions of the entire exhaust system.
*Actual performance results are not guaranteed and may vary depending on vehicle.
Each Corsa product utilizes the most advanced manufacturing methods, starting with 3D modeling through engineering and moving to automatic mandrel benders and coordinated measuring equipment once it hits the assembly line at Corsa. One of the sources of pride for Corsa is that each one of their exhaust products fits properly, each and every time.
Order Corsa's 24412 2-1/2" Dual Exit Sport Axle-Back Exhaust System with 3-1/2" Polished Tips for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
Novice skill is required for this installation.
This Corsa Axle-Back Exhaust is made of mandrel-bent stainless steel tubing with a high foil muffler and dual-polished tips. It's going to be a direct fit replacement for the factory muffler and includes everything you need for an easy installation, so today we're going to install it on our 2016 Jeep Wrangler.
Tools you'll need for this installation: 1/2" ratchet, 14mm socket, 15mm socket, and you might need an exhaust hanger removal tool.
This axle- back exhaust is going to be super easy to install. There's only one 15mm nut holding it on. Then you just have to remove the muffler from the two rubber hangers. Remove the 15mm nut on the exhaust clamp. Now we're going to remove this bracket from the rubber hanger on the Jeep. All right. Now we can move to the other hanger.
Once both hangers are disconnected, grab onto the muffler and twist it to break it loose from the pipe. Then you can pull it off. With the factory exhaust out of the way, the first thing we're going to do is put a clamp over the over axle pipe. Then grab the muffler assembly and install it into the driver side hanger on the over axle pipe. Insert the rubber hanger over the passenger side tailpipe. Put the other clamp over the tailpipe. Then install it. Once the tailpipe and muffler are in place, we can tighten both clamps. Once you get both hangers tightened down, you can move on to installing the tips. Install a tip over each tailpipe. Then tighten it with a 14mm socket. Once you get the tips in place and adjust them to your liking, your installation's finished.
All right. Let's hear it. Our Corsa Axle-Back Exhaust is installed. It gave our Jeep a nice tone, but it's not too loud and I'm loving the way these dual-tips look. Installation will only take you about 45 minutes and before you know it, you'll be heading off-road.