Covercraft Seat Glove Gray/Black Pair 2005-2009

Covercraft: SV105-GY
MSRP: $136.99
CJ's Low Price:
1508630400 30234
Earn 132 RPM Points What's this?
Covercraft Seat Glove Gray/Black Pair 2005-2009
Covercraft Seat Glove Gray/Black Pair 2005-2009 Play Covercraft Seat Glove Gray/Black Pair 2005-2009 Video 1

Product Description

Pair of Covercraft Seat Gloves for 2005-2009 Mustangs.

Seat Gloves feature high performance breathable fabric that is made from proprietary fibers that provide great air flow, even when wet. The fabric is designed to pull moisture away from the body and into the fabric, where it can easily evaporate. Driving on seats or seat covers that are not breathable can really heat things up! The superior evaporation properties allow you to cool off faster, yet your seats stay dry because the Seat Gloves allow moisture to quickly evaporate. For active people, Seat Gloves are a great way to protect your upholstery. Available in five different colors that are all trimmed with black on the sides of the seats.

*Seat Gloves are not complete seat covers. The covers do not go all the way up to the headrests like traditional seat covers.
*Not for use on seats with side airbags.


Installation Instructions

Mustang Installation

Product Reviews

Write a review
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 219.94ms
  • bvseo-msg: HTTP status code of 404 was returned;

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 121.28ms
  • bvseo-msg: HTTP status code of 404 was returned;

You Might Also Like

Product Video

Covercraft Seat Glove Gray/Black Pair 2005-2009 Video Transcript
By Bill Tumas: One of the best ways of protecting the investment you made in your Mustang was a good quality car cover. I'm not talking about those cheap one size fits all covers. I'm talking about a custom car cover specifically designed to fit your Mustang. We're going take a closer look at custom car covers from CoverCraft.

CoverCraft offers their Mustang car covers in two different materials. Shown here in gray, on the left, is their Block-It 200 Series. The Block-It 200 is a high potent non-woven fabric that is USA made and designed primarily for indoor use. It is a three-layer polypropylene material for moisture resistance and can be used for limited outdoor, but again, it's designed primarily for indoor use only.

On the right, the tan cover is their Block-It 380 Series. The Block-It 380 is a high performance Kimberly-Clark material that uses two layers with a film in-between. The film is designed to keep out moisture while allowing moisture and heat to escape from underneath the cover.

These covers are designed for both indoor and outdoor use and are UV protected as well. Both the Block-It 200 Series and the Block-It 380 Series have a soft woven liner to protect your paint when installing the cover.

Shown here is a Block-It 380 Series cover on a 1968 Mustang Coupe. This cover will fit all '64 through '68 coupes and convertibles. The fitment is so specific it actually has different models available for both single and dual rearview mirrors.

All CoverCraft covers are going to have the running horse logo on the front, elastic bands for a tighter fit in the front and the rear, a grommet is included for your antenna cutout and two grommets are pre- installed for locking your cover to your vehicle. Your paint job is one of the most expensive parts of your Mustang. Make sure you protect it with a high quality cover from CoverCraft.