cp-e Cold Air Intake Kit With DFlow Filter Satin Black Fiesta ST 2014-2015

cp-e:
FDAD00003B

Highlights

  • Satin Black Finish
  • 3" Mandrel Bent Tubing
  • Widemouth Dflow Air Filter
  • Billet Aluminum Bellmouth
MSRP $414.99
$394.24
You save $20.75

cp-e Satin Black Cold Air Intake Kit with a DFlow Filter for all 2014-2015 Fiesta STs.

cp-e has created an even better intake, with this Satin Black Cold Air Intake Kit with a DFlow Filter. Created to get the most airflow to your turbo possible, cp-e's (FDAD00003B) kit will significantly improve the overall performance for your Fiesta ST.

Features and Benefits:
- Improved Performance For Your Fiesta
- Durable Materials
- Redesigned For Best Airflow
- Satin Black Finish

Completely made in the USA, cp-e has developed on of the most unique resolutions in getting the best airflow to your Fiesta ST's turbo on the market. This kit is highlighted by an airbox that is laser cut and CNC formed from 18 gauge stainless steel. Corrosion-resistant, the box also helps facilitate cool air efficiently and will confine the filter from the hot air under your hood. The thermal properties of the airblox will allow its interior to stay cool no matter what. It will use your factory air duct along with the snorkel tube on the bottom mount to increase the amount of airflow.

This airbox also features a clear, plexiglass window to help enclose the filter away from any heat as well as provide easy access to the filter for any maintenance. This plexi-glass comes shipped with an orange peel-off protective coating so you won't have to worry about any damage in the shipment process. Not only will this airbox provide a significant improvement to your Fiesta ST, but it's also easy to install as it mounts to the stock location with laser-cut brackets and CNC-lathed mounting feet provided in this kit.

The airbox will fasten to a full 3", mandrel-bent aluminum tube that features a CNC-lathed port for your Fiesta ST's PCV system. It mounts to the airbox through a 5-ply silicone elbow & a CNC-milled aluminum bellmouth. The bellmouth provides more velocity and compresses the air to produce a minimal amount of energy loss and higher air speed.

This Kit Includes:
- Laser Cut, CNC Formed AirBox Made from Stainless Steel
- Full 3" Mandrel Bent Aluminum Tube
- CNC Machined, Billet Aluminum Bellmouth
- Clear Plexi-Glass Window
- Widemouth DFlow Air Filter
- Laser Cut Brackets & Bungs in OE Locations
- Ram Air Snorkel for More Airflow

Please Note: If your non-USDM car uses the mass air sensor you will need a tune that accounts for the added air volume. USDM cars have a mass air sensor in them however they only use it for intake air temperature measurements so there is no tune required for USDM cars.

California Residents: Proposition 65 Warning

Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.

Installation Videos

Video Transcript

We’re here with cp-e's cold air intake kit fitting your 2014 through 2015 Fiesta ST.

The cp-e cold air intake kit begins with a stainless steal laser cut air box, it's going to replace your factory box. It's going to keep heat out of the filter, gives this Plexiglas glass cover, so you can keep an eye on things. This kits going to use the DFlow reusable mesh filter, and features all three inch Mandrel bent aluminum piping, available in your choice of the race red finish or a matte black. It's going to also include the stainless steal bell mouth, five layer silicone hoses, and all necessary hardware neatly laid out for insulation. This entire kit is made right here in the USA.

This cp-e cold air kit will not require custom tuning. It's a great way to add some horse power and torque to your Fiesta ST.

Vehicle Fitment

This product will fit the following Fiesta years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.