cp-e Downpipe QKspl High-Flow Catted Stainless Steel 3" V.2 Focus ST 2013-2018

cp-e:
FDDP00002T
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 109.6ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
MSRP $669.99
$636.49
You save $33.50

cp-e QKspl 3" Stainless Steel v.2 High-Flow Catted Downpipe for 2013, 2014, 2015, 2016, 2017 and 2018 Focus STs.

Get more out of your 2013-2018 Focus ST with this cp-e QKspl 3" Stainless Steel v.2 High-Flow Catted Downpipe from CJ Pony Parts! Its one-piece design means it’s easy to install, and it comes with an adapter that lets you install it to a stock exhaust without leaks. 

Features & Benefits:
- Version 2: One-Piece Design and Easier to Install for Those without Lift in Garage
- More than 5% Gains in Upper RPMs with No Power Loss in Lower RPMs
- CNC-Lathe V-Band Turbo Flange for Easy Installation and Stock Compatibility
- Extra O2 Bung for Adding a Wideband Sensor
- Laser-Cut Stainless Steel Bracket to Help Accommodate Stock Mounting
- Includes Exhaust Gasket Adapter: Allows Installation of Downpipe to Stock Exhaust without Worry of Exhaust Leaks
- Industry-Leading Stainless Steel Flex Joint
- 200 Cell Count Metallic Honeycomb High-Flow Catalytic Converter
- Mount to 2.50" or 3.00" Exhaust Flanges with NO Exhaust Leaks
- Made of Full 3.00" “Bright Annealed” 304 Stainless Steel Mandrel-Bent Throughout for Less Turbulent Exhaust Flow
- Includes Smart O2 Simulator to Help Eliminate Unwanted Check Engine Light
- Includes All Hardware Needed to Mount to Stock Exhaust or Aftermarket Exhaust System
- Titan Finish Gives Uniform Clean Finish Throughout and Strengthens Stainless Steel and Welds for Added Reliability
- Made in the USA 

This cp-e (FDDP00002T) QKspl 3" Stainless Steel v.2 High-Flow Catted Downpipe will give your ST more than 5% gains in upper RPMs without any power loss in lower RPMs. This downpipe has a CNC-lathe V-band turbo flange that makes it easy to install and compatible with your stock exhaust, and it comes with an extra O2 bung so you can add a wideband sensor if you want. Not only that, this downpipe has a 200 cell count metallic honeycomb high-flow catalytic converter and is made in the USA out of 3" 304 stainless steel that’s mandrel-bent throughout for better air flow. 

Tech Tip: An Off-road cat-less version of this downpipe is also available. Please see P/N: FDDP00001T. 

*While this may not trip a Check Engine Light with the Smart O2 Simulators, cp-e cannot guarantee that all of the codes will be in the “ready” state. 

Please Note: Although not completely necessary, we strongly recommend installing along with a custom tune/calibration (NOT included) to get the most out of your new downpipe. 

Order a cp-e (FDDP00002T) QKspl 3" Stainless Steel v.2 High-Flow Catted Downpipe for your 2013, 2014, 2015, 2016, 2017 or 2018 Focus ST from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Note: This item is not CARB (California Air Resource Board) exempt and is not legal for sale or use in the state of California.

Installation Videos

Vehicle Fitment

This product will fit the following Focus years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.24ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 111.14ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Complete Your Package
Add to Cart