cp-e Rear Motor Mount xFlex Fiesta ST 2014-2019

cp-e:
FDXM00004B
Rating:
88% of 100

Highlights

  • Made In The USA!
  • 6061-T6 Aluminum
  • Bolt-On Installation
  • EDPM Bushing
MSRP $196.16
$186.35
You save $9.81

cp-e xFlex Rear Motor Mount for all 2014, 2015, 2016, 2017, 2018 and 2019 Fiesta STs.

The OEM rear motor mount on the Fiesta ST is known as a weak link from the factory. Virtually eliminate both engine sway and wheel hop with an xFlex Rear Motor Mount (FDXM00004B) from cp-e for your 2014-2019 Fiesta ST.

Features and Benefits:
- Billet CNC Machined 6061-T6 Aluminum
- Black Anodized Finish
- Durable EDPM Bushing
- Stainless Steel Hardware Included
- Direct Bolt-On Installation
- Helps Stabilize Engine Rotational Movement
- Virtually Eliminates Wheel Hop
- Made In The USA

cp-e went above the call of duty when it came to designing the xFlex rear motor mount. The factory motor mount location is placed near a strong source of heat. The problem with this is that the factory urethane bushings begin to break down at temperatures as low as 200F. Because of this, the full functionality of your stock motor mount is limited, especially during spirited driving. cp-e manufactured their motor mount with EDPM bushing which is much more durable than urethane and will stay structurally sound up to much higher temperatures. This particular bushing also has a much lower durometer rating, meaning that less noise, vibration and harshness will make it into the cabin in comparison to the stock rear motor mount.

This rear motor mount by cp-e is CNC machined out of 6061-T6 aluminum and designed to bolt in to the stock location of your current mount without any modification. This new design allows for much less wheel hop and engine sway allowing your Fiesta ST to hook up easier and shift more precisely during those weekend track days.

Take your Fiesta ST to the next level and order a cp-e (FDXM00004B) xFlex Rear Motor Mount for your 2014, 2015, 2016, 2017, 2018 or 2019 Fiesta ST from CJ Pony Parts today!

California Residents: Proposition 65 Warning

Installation Videos

Video Transcript

We’re here with cp-e's xFlex Rear Motor Mount fitting your 2014 through 2015 Fiesta ST.

The soft stock rubber motor mount is the cause of many of the wheel hop issues found in the Fiesta ST. The xFlex Mount form cp-e replaces that. The high-quality billet mount uses EDP and rubber which is much firmer than the factory soft rubber and has much better heat resistance than polyurethane. The kit includes the motor mount itself, mounting bracket and the necessary hardware for installation.

Cp-e's xFlex Motor Mount is a great way to address the common wheel hop issues found in the Fiesta ST.

Vehicle Fitment

This product will fit the following Fiesta years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.