cp-e knows that you don’t want to go faster, but instead you need to go faster. That need is why they have spent countless hours in researching and developing the last turbo kit that you will ever need to look at for your 2015-2020 EcoBoost Mustang!
This Atmosphere Kit designed to be a bolt-on and modular system, it comes with an exhaust manifold specifically designed with flanges to fit Precision V-Band Turbine Housings from 5558 to 6766, and Tial MV-R External Wastegates. cp-e even provides an extra O2 bung and EGT bung on the manifold if you need something to plug sensors into. The ReRoute Downpipe is designed to give a free flowing exhaust from your turbo, but it is also designed to attach to the Tial MV-R External Wastegate and ReRoute the exhaust gases back into the downpipe. cp-e also supplies you with all the necessary steel braided -AN lines for your coolant and oil routing.
This kit will not only bolt-on with any other cp-e products, but it will also allow you to upgrade to an even larger turbo in the future. Get the PTE 5858 now, and then easily purchase a much larger PTE 6766 later. Once you have upgraded your fuel system and engine internals bolting on even more power only takes a few easy steps.
Please Note: The turbocharger that is included with this kit is capable of producing at least 620hp at the wheels. But you will run into fuel starvation issues once you surpass approximately 375-400hp to the wheels. If and when you upgrade your fuel system, the next hurdle will be the internals of your EcoBoost. Along with an upgraded fuel system, upgraded rods and pistons are recommended to take full advantage of the potential the included turbocharger can offer.
Included in this Kit:
- (1) Precision 5858 V-Band GEN 1 58mm Turbocharger
- (1) Tial Black MVR External Wastegate
- (1) cp-e EcoBoost Mustang Exhaust Manifold with Precision Flanges
- (1) cp-e Upper Turbo Manifold Heatshield
- (1) cp-e Lower Turbo Manifold Heatshield
- (1) cp-e EcoBoost Mustang ReRoute Downpipe Adapter
- (1) cp-e Stainless Braided -4 AN Oil Feed Line with Heat Shielding
- (1) cp-e Stainless Braided -10 AN Oil Return Line
- (1) cp-e CNC Lathed Oil Feed Block-Side Adapter
- (1) cp-e Oil Drain Gasket
- (1) 0.71” OD Copper Crush Washer
- (1) 1/8” NPT to -4 AN 90° Oil Feed Adapter Fitting
- (1) T3/T4 -10AN Turbo Oil Drain Flange
- (1) -10AN Block Drain Flange
- (2) M8-1.25 x 20mm Cap Screw (Oil Drain Flange Hardware)
- (1) M14-1.5 x 20mm Cap Screw (Coolant Drain Block Off)
- (1) 0.80” OD Copper Crush Washer (Coolant Drain Block Off)
- (1) 3/8” Hose Barb to 1/8” NPT Adapter (Coolant Feed Block Off)
- (1) 1/8” NPT Cap (Coolant Feed Block Off)
- (1) Mini 15 Hose Clamp
- (1) 4.00” Aluminum Intake Tube
- (3) M6 x 18mm OD Flat Washers
- (1) cp-e 4.00” SynoilD Air Filter
- (1) 4.00” 45° Silicone Coupler
- (2) 4.00” Liner Clamp
- (1) cp-e 2.50” Aluminum Charge Pipe
- (1) cp-e 2.50” 90° Silicone Coupler
- (1) cp-e 2.50” 32° Silicone Coupler
- (4) 2.75” T-Bolt Clamp
- (1) O2 Bung Plug
- (1) cp-e Tunable O2 Simulator Kit
- (1) 1/8” NPT Plug
- (5) 5/16” External Lock Washer
- (5) 5/16-18 x 3/8” Hex Cap Bolt
- (1) 3.00” Band Clamp
*Even though this kit includes a smart O2 Simulator to help with a check engine light due to removing the catalytic converter, since you will be upgrading so many other components with this kit, a custom tune/calibration will be required after installation (NOT included).
Tech Tip 1: We recommend using P/N: DPCP3, this is the cp-e downpipe rear section that is specifically designed to work with this kit. If you have one of their existing downpipes or another aftermarket downpipe, installation will require modification.
Tech Tip 2: Since the design of this kit eliminates the location of the factory bypass valve, it will be necessary to upgrade the cold side piping and install an aftermarket Blow Off Valve (BOV). We recommend going with P/N: BOVK3-V, this kit is available in your choice of Satin Black or Race Red and includes a Tial Q Black BOV.
For the latest performance and enhancement equipment for your 2015-2020 EcoBoost Mustang, cp-e upgraded equipment is available from CJ Pony Parts. Developing everything for the EcoBoost Mustang from cold air intakes, downpipes, turbo kits and piping, CJ Pony Parts supplies our customers with the latest cp-e equipment. With parts and equipment designed to push the limits of your EcoBoost Mustang beyond the factory standards and deliver great performance, every owner should be able to find something that appeals to them.
Order this cp-e Atmosphere ReRoute Turbo Kit with a Precision 5858 Turbocharger and Tial Black MV-R External Wastegate for your 2015, 2016, 2017, 2018, 2019 or 2020 EcoBoost Mustang from CJ Pony Parts today!