These Ford Performance Cylinder Head Gaskets use a graphite material with steel wire rings, to prevent blow-outs. They are sold as a pair and perfect for small block engines.
Features and Benefits:
- Premium Quality
- For Windsor Engines
- Simple Installation
- Sold As A Pair
This pair of cylinder head gaskets will fit up to a 4.125 bore diameter, and are used with M-6010-R351/R352. Ford Performance parts are among the best in the industry!
Tech Tip: Several different water hole patterns have been used on 302 and 351W Ford Performance cylinder blocks and heads since their introduction. Engine assemblers should lay the head gasket on the block and the cylinder head (with front of gasket toward the front of the engine) to make sure there is a path for coolant flow from the block into the head In some cases, holes may have to be drilled in the block or head or punched in the gasket.
- 4.125 bore diameter
- 0.040 compressed thickness and 9.0cc compressed volume.
Please Note: Water holes in the gasket match blocks produced after May, 1994. Earlier blocks require 8 lower and 6 upper holes to be drilled and 4 holes plugged. Use gasket for template.