Diode Dynamics LED Reverse Light Bulb Cool White Pair Jeep Wrangler JK 2007-2018
Pair of Diode Dynamics Cool White LED Reverse Light Bulbs for 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
Are you looking for a better and more efficient way to illuminate the back of your 2007-2018 Jeep Wrangler? This Pair of Diode Dynamics Cool White LED Reverse Light Bulbs will make it safer and easier for you to back up your Jeep!
Features and Benefits of the Pair of Diode Dynamics Cool White LED Reverse Light Bulbs DD0057P:
- HP11 LED Bulb Design
- Sold as a Pair of Two (2) for your Jeep's Driver and Passenger Side
- Illuminates Crisp White Light
- Increased Brightness
- Creates More Modern Look
- Housed in Machined Aluminum Casing for More Durability
- Simple Plug-and-Play Installation
- 280 Lumens
These Diode Dynamics bulbs are sold as a pair to update the driver and passenger side of your Jeep Wrangler. Each bulb has an HP11 LED design which will illuminate a crisp and cool white hue for the maximum amount of light output. The bulbs are housed in a machined aluminum casing which is built to last. These LEDs will add an awesome modern look to your Jeep!
Founded in 2006, Diode Dynamics manufactures LED lighting products for the automotive industry. Their main focus has been on developing great products that provide superior quality with excellent service. Whether you are looking for replacement LED bulbs, full LED assemblies, multicolor accents, or unique lighting control modules, look no further than the LED lighting products from Diode Dynamics!
Order this Pair of Diode Dynamics DD0057P Cool White LED Reverse Light Bulbs for your 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Jeep JK Wrangler from CJ Pony Parts today!
California Residents: Proposition 65 Warning
These LED reverse light bulbs are going to be direct fit replacements for the factory bulbs and they're going to be brighter and last longer as well. Today we're going to be installing them on our 2016 Jeep Wrangler.
Installation of these bulbs is real simple. Just remove these two inner screws and the only tool you'll need is a Phillips screwdriver and remove the housing. To remove the reverse light bulb, turn it around, grab the connector, and rotate it counter clockwise and remove it. Give the bulb a little bit of a wiggle and pull it out. These bulbs are already brighter than the factory bulbs and they're ready to install right now, but if you want maximum brightness, grab yourself a pick or a flat head screwdriver and pop off the cap by inserting it right here in this notch and popping it off. Now you can clearly see the LEDs. This will make it a lot brighter and we can reinstall it. Place it into the connector and if you install it and it doesn't light up, simply pull it out, rotate it 180 degrees, and reinstall it.
Now we're going to test and see if it works. It looks like it's working. We can reinstall it. Install it into the housing. Line up the notches, rotate it clockwise, and reinstall the housing. Install the housing with the reverse light on the bottom. Snap it in. Reinstall both screws. Repeat the process on the other side and your installation is finished.
Here's a side by side comparison. We have the LED reverse light on the right and the incandescent bulb on the left. As you can see, the LED bulb is significantly brighter and it's a nice, cool white, rather than yellow.
Our LED reverse lights are installed. They are way brighter than the factory bulbs, so it will definitely help us backing up at night. Installation is going to take about 15 minutes and, before you know it, you'll be heading off road.