This Diode Dynamics Driving Light Kit (FGLA99) is a great upgrade to your S550’s fog lights! With higher output intensity than any other 3” light on the market, these LED pods have been designed for maximum functionality. Custom-engineered units replace your stock lights, and with the included round bezel, the SS3 Fog Kit has a clean, factory-style appearance, only much brighter!
Features and Benefits:
- Direct Replacement for Ford Mustang Fog Lamps
- SAE-Compliant Road-Legal Output
- Includes Round Bezel, for Factory-Style Appearance
- Plug and Play, No Modification Needed
- Advanced TIR Optics Provide High Efficiency and Focus
- Durable Powder-coated Aluminum Extrusion
- Engineered and Manufactured in USA
Traditional driving light setups like reflectors or simple lenses lose light internally, and to glare. Not all the light shines on target! Instead, the custom engineered TIR optic in the SS3 collects all the light from the LED, and directs it only where you need it. This drastically reduces glare and improves total efficiency. From there, while other options on the market lose as much as 10% of the light shining through an outer lens, the SS3 features an integrated lens design for greater efficiency and light output. Thanks to this innovative feature, when coupled with high-intensity LED chips, the total intensity of the SS3 is much greater than other fog light setups or even competing LED pods.
The white these lights emit is a 6000K color temperature, which is a true white output which matches most factory LED lighting. These lights are also designed to supplement your high beams, but are great for general illumination as well. Rather than a traditional "spot" pattern, the Stage Series Driving pattern shines in an 18x8 degree spread, providing just enough width to fully illuminate the road ahead at high speeds and the Pro version nearly doubles the light output.
Stage Series LED lighting has been extensively tested for long-term operation from -40 to 185 degrees F, along with vibration, moisture intrusion, and corrosion testing. All these tests are completed to SAE standards, just like factory components. They've also been put to the test on-road by racers and enthusiasts alike. With proper installation, these lights meet SAE J581 standard as a Driving/Auxiliary High Beam Light for legal on-road use. Please check your local laws and regulations for aiming, installation, and applicability. Thanks to custom-molded brackets, the SS3 Fog Light Bracket Kit can be installed on your Ford Mustang in minutes. Simply remove your factory fog light assembly and ours will bolt right in its place! Wire adapters are included to connect the lights to your factory bulb sockets - no additional wiring needed!
This Kit Includes:
- (2) SS3 Pro White SAE/DOT Driving Standard LED Pods
- (2) H11 DT Adapters
- SS3 Type A Mounting Kit
- All Necessary Hardware
- 2016-2017 V6 Premium Mustangs
- 2015-2017 EcoBoost Mustangs
- 2015-2017 GT Mustangs
- Peak Beam Intensity (Candela): 66,500 cd
- Illuminance (LUX @ 10m): 665 lux
- Measured Output (Lumens): 3,000 lm
- Raw Output (Lumens): 5,796 lm
- Output Color: 6000K White
- Beam Angle: 20° x 8°
- Operating Voltage: 9-16V
- Polarity: Polarity Specific
- Operating Temperature: -40C to 85C (-40F to 185F)
- LED Emitter: Luxeon Z ES
- Connector(s): Deutsch DT Input
- Driver Features: Constant Current
- Materials: Polycarbonate Lens, Aluminum Casting, Rubber Gasket
- Cooling: Passive, Pin-Fin Heatsink
- Compliance Ratings: SAE J575 Durability Test
- Intrusion Ratings: IP67 Weatherproof
Please Note: This kit does not include any additional wiring and/or switches that would be necessary to upgrade a 2015 V6, 2016-2017 Base Model V6, GT350 and GT350R models that were not originally equipped with Fog Lights from the factory.