Drake Muscle Cars Rear Spoiler Shelby GT Style Satin Black Fastback 2015-2019
Drake Muscle Cars:
Drake Muscle Cars Rear Spoiler Shelby GT Style Semi-Gloss Black Fastback 2015-2019 is rated out of 5 by 18.
- Fits Fastback Mustangs
- Race-Inspired Appearance
- Increases Rear Downforce
- Includes Installation Hardware
You save 10%
Intermediate skill is required for this installation.
Rated 5 out of 5 by BWG1 from Excellent Value & Looks Great For the amount of money you spend, you get an excellent value! You use 4 of the existing factory GT holes, so no drilling. I took off the factory spoiler/left over adheasive and installed this one in 35 minutes using a 10mm socket/wratchet, towel, prying tool, cleaner, and heat gun. The hardest part is removing the factory spoiler adheasive or drilling proper spaced holes if you don't have a spoiler (use the box it came in and trace an outline of the spolier/poke holes in it as a template). It's a very close color match to the rear bumper valances, and appears to be easy to paint. The adheasive strips are thin, but suitable for their main purpose which is to pad and seal, not hold it on. Pretty aggresive and more functional than factory (non pp). Thought i'd regret it but I don't one bit. Again, it's cheap though. Best way to put it is it's the perfect designed cheap spoiler that won't flex, rattle, or break and looks great, to me.
Date published: 2018-12-18
Rated 5 out of 5 by Izaacr from Quick, easy install! So I didn’t have pre-drilled holes because my car is a base model. So, I downloaded the template and got it printed out. I taped it down, got the measurements, and drilled the appropriate holes. That template made everything easy. It took me less than an hour to install and I couldn’t be happier with the way it turned out. The best part about it is that you get your bang for your buck. Highly recommended!
Date published: 2019-01-28
Rated 5 out of 5 by Ezio from Looks fantastic Bought this recently because i wanted a wing and didnt have alot of money. For being the cheapest wing option it looks better than most of the wings that are 4-6 hundred
Date published: 2019-02-19
Rated 5 out of 5 by Redstang from Easy install Great fit. Finish is close to the factory rockers on base gt. More aggressive than stock but not over the top. Very happy with it
Date published: 2019-01-20
Rated 5 out of 5 by Ryan from Super easy install, looks great This spoiler looks incredible, huge upgrade over the stock spoiler, and at a much better price point when compared to other aftermarket options. Install is very straightforward, the only difficult part was removing the factory spoiler. Takes a heat gun and some patience, but the new spoiler is a perfect fit and makes an immediate difference in the overall look of the car. Highly recommend.
Date published: 2018-11-20
Rated 5 out of 5 by Kennyb from Looks great! Looks right at home on my 16 Ecoboost. I wish the box would have a template that you could use. Measure twice. Drill once!
Date published: 2019-01-19
Rated 5 out of 5 by Mert from Looks great, easy to install Bought this to dress up the car along with new wheels. The spoiler was easy to install and looks great
Date published: 2019-03-28
Rated 5 out of 5 by Fast1 from Drake Muscle Cars Rear Spoiler I installed this on my 2015 Ecoboost in about 2 hours. Taking off the stuck on factory spoiler took the longest time. The factory spoiler is actually two pieces. The top painted portion will separate with a good tug on the corner and lift off. The other piece is black and secured with 4 nuts and adhesive. To take off the nuts, open trunk and remove the two black caps, two large black rubber stoppers, and all the plastic tabs holding the carpet in place. The cap coveting the lock snaps off. Remove the 4 bolts and then remove the adhesive. I soaked the adhesive in WD40, took some time to remove. Great time to polish trunk once all the sticky stuff is removed. Apply loctite to the 4 studs and insert in the 4 holes in spoiler. Place on truck and use washers and lock nuts to secure. Require no drilling. I didn’t unpeel the 3M tape. The 4 screws are secure enough. Replace everything in reverse. Looks awesome!
Date published: 2019-04-20
I have heard that some spoilers will turn white in the sun because they do not have UV protection. Does this one have UV protection will it fade in time
This is a bare part that can be painted or clear coated.
Date published: 2019-07-17
Can you tell me if this spoiler is paintable so that I can color match it to my car?
It can be painted.
Date published: 2019-06-26
Does this fit on 2018 ford mustang ecoboost?
Yes it does.
Date published: 2019-06-21
Does this come with the screws that are supposed to go in the 4 holes on the bottom of the spoiler or are we supposed to swap the stock ones onto the new one?
Easy and secure install with included hardware.
Date published: 2019-05-30
This spoiler fit on a 2015 Ecoboost and use the same holes from factory?
Date published: 2019-05-01
Where can I download the template for this? I heard there is a download you can print out. Thanks
It is below the product description. https://www.cjponyparts.com/skin/frontend/cj-pony/default/images/install-pdf/install_rs468.pdf
Date published: 2019-04-23
Will this fit on a performance pack 1 2019 as a replacement for the factory spoiler using same holes?
Date published: 2019-04-22
Would this work on a convertible 2015, there's an antenna on my convertible would it get in the way of that? Basically, how far out does this spoiler go?
This will fit 2015-2019 fastback and convertibles. There is an image on the parts page that shows whereit mounts.
Date published: 2019-08-05
Complete Your Package