Dual Exhaust 2" Kit With MagnaFlow Mufflers 260/289/302 1965-1970

CJ's Part Number:
EXK3AM
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 121.11ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
MSRP $545.18
$440.99
You save 19%

Dual Exhaust 2" Kit with MagnaFlow Mufflers for all 1965, 1966, 1967, 1968, 1969 and 1970 260, 289 or 302 Mustangs.

Enhance the exhaust system of your 1965-1970 260, 289 or 302 Mustang with this impressive Dual Exhaust 2" Kit with MagnaFlow Mufflers newly available from CJ Pony Parts. CJ's has built this kit using premium quality exhaust piping with two MagnaFlow 2" Mufflers.

CJ Pony Parts strives to bring the very best equipment pieces and kits to their customers, including occasionally producing a kit of equipment that comes from a large name brand, like MagnaFlow. With the two included MagnaFlow mufflers, CJ's bring some of the best equipment available to the table in a kit that is affordable and will bring you increases in power and engine exhaust flow.

This Dual Exhaust 2" Kit with MagnaFlow Mufflers Includes:
- H-Pipe
- Driver Side Intermediate pipe
- Passenger Side Intermediate Pipe
- Driver Side Tailpipe
- Passenger Side Tailpipe
- Two (2) Exhaust Donuts
- Two (2) MagnaFlow 2" Inlet/Outlet Mufflers
- Dual Exhaust Muffler Hangers
- Eight (8) 2" U Clamps

*This exhaust kit will NOT work with staggered shocks

Researching aftermarket exhausts for Mustangs always seems to lead to a few common brands that have quality products and the most recognizable rumbles. Of these, MagnaFlow clearly leads the pack, with over 30 years of experience and some of the highest quality products on the market. CJ Pony Parts offers a wide variety of MagnaFlow products for any Mustang on the road, so check out their products and upgrade your Mustang's exhaust today!

Order a new Dual Exhaust 2" Kit with MagnaFlow Mufflers for your 1965-1970 260/289/302 Mustang from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Mustang years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.22ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

I have a 1967 Mustang Coupe GT and need to know if this kit will work with the chrome tips that exit just below the rear valance.

Asked by: Jason
Not sure which chrome tips you are referring to but this does exit below the valance.
Answered by: rk cjpp
Date published: 2019-08-20

I have headman shorty headers (88400 part number). Will this kit have the right length pipe to work the whole length of the car and what reducer, if any, will I need to bolt it up to the collector. I have a 64.5 mustang with a 302 (block is a 1987).

Asked by: Jethro
The h-pipe in this kit will only work with stock manifolds. We offer this kit that would require a set of custom down pipes. https://www.cjponyparts.com/dual-exhaust-2-kit-with-magnaflow-mufflers-with-short-h-pipe-1965-1970/p/EXK3GM/
Answered by: rk cjpp
Date published: 2019-03-31

Will item #: EXK3AM fit a 1966 Mustang Coup with an in-line 6 engine and will it give my vehicle more of a “rumble” while driving and idling?

Asked by: Bvas
This kit will not work on a 6 cylinder equipped mustang only v8's.
Answered by: rk cjpp
Date published: 2019-03-29

Hello. I currently have a stock single exhaust system on my 66 Mustang. I am interested in changing to a dual exhaust system. What modifications if any will I need to make to my car in order to "hang" the exhaust system? Thanks Ace 66

Asked by: Ace 66
Just the addition of extra hangers.
Answered by: rk cjpp
Date published: 2019-03-18

Does EXK3AM Kit H-pipe bolt directly on the stock exhaust Manifold or do I need an additional part(s) to complete the install?

Asked by: Dons
The h pipe bolts directly to the stock manifolds.
Answered by: rk cjpp
Date published: 2018-10-19

Will this system work for 69 302 convertible from a single exhaust? Is it all bolt and clamp together?

Asked by: Deepsea69
This will work for your application but may require some modification to the intermediate pipes on a convertible.
Answered by: rk cjpp
Date published: 2018-08-24

What exhaust work on a L6 200

Asked by: Mattrixkvshz
Please call toll free at 1-800-888-6473 and speak with a sales rep. we need to know what year your mustang is.
Answered by: rk cjpp
Date published: 2018-08-23

Hi, question to item EXK3AF (Dual Exhaust Kit 2" With Flowmaster Mufflers 260/289/302 1965-1970): - I want to use this kit with Hedman 88300 Long tube headers - does this match?

Asked by: geryu
Use this kit. https://www.cjponyparts.com/dual-exhaust-2-kit-with-magnaflow-mufflers-with-short-h-pipe-1965-1970/p/EXK3GM/. The h-pipe may need modified to fit your specific headers.
Answered by: rk cjpp
Date published: 2018-08-09
  • y_2019, m_10, d_20, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_EXK3AM, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 107.5ms
  • QUESTIONS, PRODUCT