Dual Function 5-LED Headlight 7" High/Low Beam Black Pair Jeep Wrangler TJ 1997-2006/ JK 2007-2018
Pair of Black 7" Dual Function High and Low Beam 5-LED Headlights for all 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 and 2006 Jeep TJ Wranglers, and for all 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Jeep JK Wranglers.
California Residents: Proposition 65 Warning
Tools you'll need for this installation, a 3/8 ratchet, T40 Torx Bit, 14 millimeter wrench and a set of cutters, crimpers and strippers.
Installation of these Halo headlights is real simple. Remove the grill by removing the six clips holding it on. Remove the grill by pulling it forward, then remove the four T15 screws securing in the headlight ring. Remove the retaining ring and set it aside. Slide up the red clip to unlock the connector, press it to remove it. Grab your new LED headlight and the adapter harness and plug them together. Then connect this to the headlight harness on the Jeep. Shove the harness back to make room for the headlight, and put it in the housing. Install the retaining ring, install the four screws.
Here we have on the left our LED headlight and on the right is our halogen. The LED headlight is much brighter and it looks really good too. Our LED headlights are installed, they look absolutely killer on the front of this Jeep. I really like the black divider. They're way brighter than the factory headlights. Installation is going to take you about 30 minutes. Before you know it, you'll be heading off-road.