Dynacorn Seat Platform In Weld-Thru Primer Driver Side Coupe/Fastback 1965-1968

Dynacorn: 3649QWT
CJ's Low Price:
$70.99
1508112000 969
Earn 70 RPM Points What's this?
Dynacorn Seat Platform In Weld-Thru Primer Driver Side Coupe/Fastback 1965-1968
Dynacorn

Product Description

Dynacorn Driver Side Seat Platform In Weld-Thru Primer for 1965, 1966, 1967 and 1968 Coupe and Fastback Mustangs.

When you are replacing your floor pans, new seat platforms are a recommended replacement as well. It would be difficult to drive your 1965-1968 Fastback or Coupe Mustang without a properly mounted seat. Dynacorn's premium-quality Seat Platform (3649QWT) mounts to the top of the floor pan where the front seat bolts directly to it. This OEM-style, direct-fit replacement platform features a reinforcement brace on the underside of the seat platform, just like the original, as well as a weld-thru primer finish to help further protect against rust damage. You can rest easy knowing that Dynacorn's superior quality and construction will be a perfect fit to your classic pony. Order your new seat platform from CJ's today!

Advantages of Weld-Thru Primer:
- Reduced spatter
- Lower distortion of the panels
- Helps when welding a new panel to old metal
- Superior conductive properties that help minimize high heat zone problems
- Eliminates corrosion that would form between overlapped panels or multi-layered spot welds
- Reduces prep time when welding new parts to new parts that are both covered in the weld thru primer
- Helps prevent resin build up between welds that can trap moisture in the old porous steel that leads to failure at the weld borders
- Lower resistance at the weld surface allows better penetration into the denser, new steel that helps forgive an old alloy's problems with porosity and impurities

*The raised seat platform must be welded to the floor pan for a correct installation.
*This seat platform will also fit 1967-1968 Coupe Mercury Cougars.
*Don't forget to grab the coordinating Passenger Side Seat Platform (3649PWT), too!

Restoring your Mustang can be a massive project. There are literally hundreds of parts that you may need to replace, and finding quality replacements can be a battle. While there are lots of choices out there, Dynacorn offers the widest selection in parts and some of the highest quality found anywhere. CJ Pony Parts offers more than 500 Dynacorn parts, allowing you to find practically anything you need. Browse our huge selection today and get to work restoring your classic beauty!

Order this premium Dynacorn (3649QWT) Driver Side Seat Platform In Weld-Thru Primer for your 1965, 1966, 1967 or 1968 Coupe or Fastback Mustang today from CJ Pony Parts!

Similar Mustang Parts

similar Mustang parts More Floor Pans  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Dynacorn Seat Platform In Weld-Thru Primer Driver Side Coupe/Fastback 1965-1968 is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Nice part, installed easily. I did not install this myself, but my guy who welded this in, said it fit very well, with little fitment needed. And he said it was a well made part.
Date published: 2017-04-05
Rated 5 out of 5 by from great product The material is superb, strong and fits excellent great quality in this product
Date published: 2017-03-16
  • y_2017, m_10, d_15, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_3649QWT, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 35.16ms
  • REVIEWS, PRODUCT

Product Questions

  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 114.35ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

You Might Also Like