Edelbrock C-26 Dual Quad Intake Manifold for Small Block Chevy 1955-1986 Non-EGR

Edelbrock:
5425
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 145.56ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$406.95

Edelbrock C-26 Dual Quad Intake Manifold for Small Block Chevy 1955-1986 Non-EGR

Edelbrock Part # 5425 C-26 Dual-Quad intake manifold is for 1955-86 262-400 c.i.d. S/B Chevy's. This dual-quad has a low profile for hood clearance on most vehicles. Air-conditioning bosses and front oil filler tube boss included. Stock alternator brackets do not fit Carb center to carb center: 6-7/16". Accepts oil fill tube and breather #4803. Use with Performer-Plus cam #2103 for low-end torque or Torker-Plus cam/kit #5002 for top-end power.

-1975 Chevrolet C10-1976 Chevrolet C10-1977 Chevrolet C10-1978 Chevrolet C10-1979 Chevrolet C10-1979 GMC C1500-1979 GMC C2500-1979 GMC C3500-1980 Chevrolet C10-1980 GMC C1500-1980 GMC C2500-1980 GMC C3500-1981 Chevrolet C10-1981 GMC C1500-1981 GMC C2500-1981 GMC C3500-1982 Chevrolet C10-1982 GMC C1500-1982 GMC C2500-1982 GMC C3500-1983 Chevrolet C10-1983 GMC C1500-1983 GMC C2500-1983 GMC C3500-1984 Chevrolet C10-1984 GMC C1500-1984 GMC C2500-1984 GMC C3500-1985 Chevrolet C10-1985 GMC C1500-1985 GMC C2500-1985 GMC C3500-1986 Chevrolet C10-1986 GMC C1500-1986 GMC C2500-1986 GMC C3500

Installation Notes    

    Manifold ht: A-2.95", B-3.55"
    Carb pad height: 3.25"
    Carb recommendations: EdelbrockAVS2 Series # 1903 and # 1904 500 cfm.
    Port exit dimensions: 1.18" x 1.90"
    Recommended intake gasket: Edelbrock # 7201.
    Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
    Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
    NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.
    DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.
    Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
    H.E.I. will fit
    Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.
    Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.

Center Maximum Height    3.250 in
CNC Ported    No
Front Maximum Height    2.950 in
Material    Aluminum
Rear Maximum Height    3.550 in
Single Or Dual Plane Type    Dual Plane

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following C10 years:

This product will fit the following Sierra years:

This product will fit the following Sierra 2500/3500 years:

This product will fit the following Silverado years:

This product will fit the following Silverado 2500/3500 years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.82ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 122.2ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;