Edelbrock Carburetor Performer Remanufactured 500 CFM Satin Finish Non-EGR With Manual Choke



  • Street Performance
  • Easy to Tune
  • Manual Choke
  • Made in the USA

Edelbrock Remanufactured 500 CFM Satin Finish Non-EGR Performer Carburetor with Manual Choke.

Designed for street performance applications, this Remanufactured Non-EGR Performer Carburetor (9904) can be used with gasohol and blended fuels. The Performer Series is available from Edelbrock and features an all-aluminum body in a satin finish. It flows at 500 CFM, delivering the proper mixture of fuel and air to your engine. The part is equipped with a manual choke, putting the power in your hands to slowly open the choke as necessary. 

Features and Benefits:
- Calibrated for Optimal Street Performance 
- Lightweight All-Aluminum Body Resists Warping
- Uses Metering Rods to Transition Between Circuits 
- Easily Change Metering Rods without Carburetor Removal
- Holds a Tune and Maintains Consistent Performance 
- Compatible with Gasohol and Blended Fuels 
- Tub-Type Bowls and Rear-Pivot Floats 
- Remanufactured Carburetor with Satin Finish 

The Edelbrock Carburetor is an exceptional choice for consistently reliable street performance in both small block and some big block engines. It uses metering rods to transition between circuits, and it won't be affected by engine backfires. Thus, you won't have to deal with blown-out power valves. The rods can be changed in mere minutes without carburetor removal or fuel draining.

- Metering Rod Size: .065 x .047 in
- Gasket or Seal Included: Yes
- Barrel Quantity: 4 Barrel
- Flange Type: Square
- Secondary Jet Diameter: 0.095
- Main Venturi Diameter: 1.19
- Body Height: 3.25
- Bore Diameter: Primary Bore 1.44; Secondary Bore 1.69
- Spring Force: 5" Hg (Orange)
- Application: Universal
- Marine Approved: No
- CFM Rating: 500 cfm
- Primary Jet Diameter: 0.086

What's more, while the Performer Series is precisely tuned, it is also designed to hold a tune. Expect unchanged calibration and consistent performance, especially compared to other carburetors. 

Tech Tips: 
- Recommended cubic inch displacement for small block dual-quad applications is 302-400+ c.i.d.
- Recommended cubic inch displacement for big block dual-quad applications is 396-502+ c.i.d.
- Electric choke P/N: EDL1478 can be added if needed. 
- Performer Series Carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket P/N: SRK4000. 

Additional Notes: 
- Edelbrock carburetors are not calibrated for or compatible with alcohol, race, or E85 pump fuel. The use of alcohol or E85 in your Edelbrock carburetor will damage your carburetor.
- The use of a new fuel filter between the fuel pump and carburetor is required. Failure to do so will void the manufacturer. 

California Residents: Proposition 65 Warning

Related Categories: Mustang Parts, Mustang Engine, Mustang Carburetors, Ford Bronco Parts, Ford F-100 Parts

Installation Difficulty


Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account