Edelbrock CYLINDER HEAD PERFORMER 1991-2006 JEEP INLINE SIX 4.0L FLAT TAPPET

Edelbrock:
50169
$1,499.50

Edelbrock CYLINDER HEAD PERFORMER 1991-2006 JEEP INLINE SIX 4.0L FLAT TAPPET

The Edelbrock #50169 Performer Cylinder Head is designed as a bolt-on performance upgrade for 1987-2006 Jeep’s with a 4.0L inline six engine. They feature better flowing intake/exhaust ports along with a modern combustion chamber design and back cut and swirl polished valves for improved flow. Retains the stock valve angle, pushrod length and valve cover bolt pattern for use with factory components and off the shelf accessories. Larger reinforced rocker bosses for improved strength at high RPM and Heli-Coil® threaded inserts in the intake manifold bolt holes for added strength as well as a 3/4" deck throughout the head also promotes stiffness and durability. This cylinder head is machined to accept both distributor or coil pack ignition. To optimize airflow, this cylinder head is designed with a 1991-2006 4.0L intake port location and 1991-98 4.0L exhaust port size. As a result, this cylinder head must be used with a 1991-2006 intake manifold and a 1991-1998 exhaust manifold. Aftermarket exhaust headers can also be used in place of 1991-1998 exhaust manifolds and MUST be used in place of 1999-2006 exhaust manifolds. Most aftermarket exhaust headers are compatible, but please check with the exhaust header manufacture to verify. This head is NOT compatible with 1999-2006 OEM exhaust manifolds.

Installation Notes    

    This cylinder head is 50-state emission legal for 4.0L engines when used with factory Fuel Injection calibration and components (E.O. Number D-215-94). Pending 50-state emission legal for 4.2L engines when used with a Mopar Fuel Injection Conversion Kit (E.O. Number D-265-21).
    Recommended spark plugs: Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat.
    Recommended gasket for 4.0L: Edelbrock #7348 or Fel-Pro #26211PT. Deck thickness: 3/4".

CNC Ported    No
Combustion Chamber Volume    55.0 cc
Deck Height    9.435 in
Deck Thickness    0.750 in
Exhaust Valve Diameter    1.500 in
Guide Plates Included    No
Intake Runner Volume    144.0 cc
Intake Valve Diameter    1.910 in
Material    Aluminum
Push Rod Diameter    0.312 in
Valve Angle    10 deg
Valve Spring Diameter    1.260 in
Valve Spring Maximum Lift    0.540 in
Valve Stem Diameter    0.312 in

-1997 Jeep Wrangler-1998 Jeep Wrangler-1999 Jeep Wrangler-2000 Jeep Wrangler-2001 Jeep Wrangler-2002 Jeep Wrangler-2003 Jeep Wrangler-2004 Jeep Wrangler-2005 Jeep Wrangler-2006 Jeep Wrangler

California Residents: Proposition 65 Warning

This item is 50-state legal (CARB E.O. Number D-215-94)

Vehicle Fitment

This product will fit the following Wrangler years:

  • 1997,
  • 1998,
  • 1999,
  • 2000,
  • 2001,
  • 2002,
  • 2003,
  • 2004,
  • 2005,
  • 2006,
Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.