Edelbrock Inline Fuel Pump and Regulator Kit 600HP

Edelbrock part # 35943 kit will include the in-line electric fuel pump # 3594 which provides 67 GPH at 45 psi and the # 1728 Fuel pressure regulator. The fuel pump will include mounting hardware and it will come with 3/8 barbed fittings. Russell fittings allow the customer to use –6 AN fitting (Russell part # 670470) if desired. This kit will support up to 600 horsepower @ 45 psi.

Terminal Type    Threaded
Fuel Pump Inlet Type    Hose Barb
Maximum Amperage Draw    10 A
Outlet Thread Diameter    0.393701 in
Terminal Gender    Male
Connector Gender    Male
Minimum Pressure    35.0
Wire Quantity    2
Voltage    12 VDC
Terminal Quantity    2
Pump Type    Electric
Gasket Or Seal Included    Yes
Connector Shape    Round
Seal And Lock Ring Included    No
Strainer Included    No
Negative Ground    Yes
Fuel Sending Unit Included    No
Wiring Harness Included    No
Gasket Or Seal Material    Copper
Pump Design    In-line Electric Fuel Pump
Mounting Bracket Included    Yes
Mounting Hardware Included    Yes

Average Flow Rating    61 gpm
Compatible Fuel Type    Gas
Fuel Type    Gas
In Tank or External    External
Inlet Fitting Thread Size    10mm x 1
Inlet Thread Diameter    0.393701 in
Inlet Type    Hose Barb
Internal Or External    External
Maximum Pressure    90.0
Outlet Fitting Thread Size    10mm x 1
Outlet Outside Diameter    0.375 in
Outlet Quantity    1
Outlet Type    Hose Barb
Regulator Included    Yes
Universal Or Specific Fit    Universal