Edelbrock Performer RPM Small Block Ford 347 Crate Engine EnduraShine with front sump oil pan

Edelbrock Part # 45264 Performer RPM small-block Ford 347 crate engine offers the best of quality and performance with 438 HP & 413 ft/lbs. of torque. This engine combines a Dart cast iron 4 bolt main block and a forged Scat rotating assembly which is then paired with our proven Edelbrock Power Package parts. This Performer RPM 347 engine includes a Milodon oil pan and pickup designed for use with 1973 and earlier applications that require a front sump to clear the crossmember and/or suspension.Engine Specifications: • Finish: EnduraShine • Displacement: 347 c.i.d. (4.030" bore x 3.400" stroke) • Horsepower: 438 hp • Torque: 413 ft-lbs. • Compression: 9.5:1 • Block: Dart Small-block (8.2" deck height) • Crankshaft: Scat Forged Steel • Pistons: Scat Forged • Camshaft: Rollin' Thunder Hydraulic Roller #2281 • Rocker Arms: 1.6:1 Roller #77780 • Manifold: RPM Air-Gap #75214 • Cylinder Heads: Performer RPM #602515 • Carburetor: Thunder Series AVS 800 cfm • Water Pump: Victor series aluminum #88414 • Distributor: Included • Valve Covers: Elite II • Warranty: 2-year / Unlimited mileage

Installation Notes    

    Ships with no oil inside of engine
    Your engine is supplied with 6 Qtrs.. of Edelbrock Break-In Oil in the crate. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming.
    Equipped with 3-bolt pulley damper, right-hand inlet water pump and left-hand timing pointer. Optional 4-bolt pulley damper, left-hand inlet water pump and right-hand timing pointer available by request.
    Front sump engines should install an OEM dipstick (Ford #M-6750-A302) in the passenger side of the timing cover.
    Any dipstick holes that are not used must be plugged. The threaded provision on the Milodon oil pan will require a 5/8