Edelbrock Reconditioned Carburetor 500 CFM Thunder Series AVS Electric Choke Endurashine For Dual-Quad Intake Manifolds

Edelbrock:
180349
$528.95

Edelbrock Reconditioned Carburetor 500 CFM Thunder Series AVS Electric Choke Endurashine For Dual-Quad Intake Manifolds

The Edelbrock 18034/180349 Thunder Series AVS 500 CFM electric choke EnduraShine carb has been designed and calibrated to deliver optimum street performance in Dual-Quad applications. Several characteristics make the 18034 Thunder Series AVS 500 CFM electric choke EnduraShine carburetor an outstanding street performer. The first one is that metering rods are utilized to transition between circuits. The carb is unaffected by engine backfires, which means that there are no power valves to blow out, and the rods can be changed in seconds without carburetor removal or fuel draining. Secondly, the carburetor has the unique ability to hold a tune, so once it is tuned, the carburetor stay's tuned. What this means to you is that compared to other carburetors, the performance remains consistent and the calibration stays unchanged. The third characteristic is the primary and secondary booster clusters that are utilized offer the most accurate and up-to-date calibration available for todays fuels and octane levels. Fourth the unique Thunder Series Qwik-Tune Secondary Air Valve allows for limitless calibration of the secondary circuit with simple hand tools while on your vehicle. (CALIBRATED FOR DUAL-QUAD APPLICATIONS) Designed and calibrated for small cubic-inch engines such as 305 c.i.d and smaller Chevrolet, 302 c.i.d. and smaller Ford and dual-quad applications such as our new RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram. Match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. #1801/#1802 are calibrated for single-quad applications and factory equipped with: Metering Jets - Primary .086, Secondary .095, Primary Rod .065 x .052, orange spring (5 Hg). #1803/#1804 is calibrated for dual-quad applications and factory equipped with: Metering Jets - Primary .086, Secondary .077, Metering Rods - .065 x .057, #1804 includes Primary .086, Secondary .077, Metering Rods - .065 x .052, Step-Up Spring - orange (5 Hg).

-1964 Ford Mustang
-1965 Ford Mustang
-1966 Ford Mustang
-1967 Ford Mustang
-1968 Ford Mustang
-1969 Ford Mustang
-1970 Ford Mustang
-1971 Ford Mustang
-1981 Chevrolet C10
-1981 GMC C1500
-1981 GMC C2500
-1982 Chevrolet C10
-1982 GMC C1500
-1982 GMC C2500
-1983 Chevrolet C10
-1983 Ford Mustang
-1983 GMC C1500
-1983 GMC C2500
-1984 Chevrolet C10
-1984 GMC C1500
-1984 GMC C2500
-1985 Chevrolet C10
-1985 GMC C1500
-1985 GMC C2500
-1986 Chevrolet C10
-1986 GMC C1500
-1986 GMC C2500
-1986 GMC C3500

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following C10 years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.