Edelbrock Part # 7562 RPM Air-Gap 2-R intake manifold is designed for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads. The open air space separates the runners from the hot engine oil, and as a result, the air/fuel mixture stays cooler for a denser charge and more power Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A/C brackets for the street.
Center Maximum Height 5.220 in
CNC Ported No
Front Maximum Height 4.450 in
Rear Maximum Height 6.000 in
Single Or Dual Plane Type Dual Plane
Recommended intake gasket: Edelbrock # 7202.
Manifold height: A-4.45", B-6.0"
Carb pad height: 5.22"
Carb recommendations: Edelbrock AVS2 or Performer Series 750-800 cfm. Use bracket # 8031 for 1972-78.
Port exit dimensions: 1.56" x 2.24"
Will not fit under stock hood of Corvette, 1964-67 Chevelle or 1967-81 Camaro.
Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant # 1076, DO NOT USE END SEALS GASKETS.
Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.