Edelbrock RPM Ford FE 390/428 Cylinder Head
Edelbrock RPM Ford FE 390/428 Cylinder Head
The Edelbrock #60059 Performer RPM Bare Cylinder Heads are designed for use with 1961-76 390-427-428 Ford applications. Edelbrock Performer RPM heads are perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed. These cylinder heads deliver great throttle response and power from 1500 to 6500 rpm. They also feature the highest quality intake and exhaust valves and valve springs. For use on pre-pollution controlled vehicles only.
Installation Notes
428 Cobra Jet-sized valves promote excellent flow for streetable power
Rocker shaft stud kit #6009 provides better rocker shaft retention and is highly recommended for use with Edelbrock FE heads. It eliminates wearing of the threads and the possibility of bottoming the rocker shaft bolts in the head.
Match with Edelbrock head gasket sets.
390 GT exhaust will not fit.
Bare heads will have valve guides and seats installed, but will require final sizing and a valve job to match the valves you will be using.
Recommended spark plugs are Champion RC12YC or equivalent 14mm x 3/4" reach with flat gasket seat. Deck thickness: 5/8".
CNC Ported No
Combustion Chamber Volume 72.0 cc
Deck Height 10.170 in
Deck Thickness 0.625 in
Guide Plates Included No
Intake Runner Volume 170.0 cc
Material Aluminum
Push Rod Diameter 0.312 in
Valve Angle 13 deg
-1968 Ford Mustang-1969 Ford Mustang-1970 Ford Mustang
California Residents: Proposition 65 Warning
