Edelbrock Victor Jr. Supercharged Small Block Ford 5.0L Coyote Crate Engine with Tuner

Edelbrock:
46890
$29,221.95

Edelbrock Victor Jr. Supercharged Small Block Ford 5.0L Coyote Crate Engine with Tuner

Edelbrock supercharged 5.0L Ford Coyote crate engine part # 46890 produced 785 hp and 660 ft-lbs. of torque (with 93 octane fuel) at the flywheel. The core of this engine is a brand new Ford lightweight aluminum block with forged and balanced crankshaft, forged Manley H-Beam connecting rods and Mahle forged aluminum pistons. Sitting on top is an Edelbrock E-Force supercharger with Eaton TVS R2650 rotors. Also included are the essential supercharger kit components, such as the 8 rib drive belt, electric intercooler water pump, intercooler plumbing and intercooler recovery tank, as well as fuel rails, 60 lb./hr. fuel injectors, coils, mass air flow sensor (MAFS) housing and re-usable air filter. Includes all front end drive accessories: water pump, alternator, idlers, tensioners, belts and hardware. Pair with universal heat exchangers for a complete installation.Engine Specifications: • Finish: Black powder coated • Displacement: 5.0L (302 c.i.d.) • Horsepower: 785 hp • Torque: 660 ft-lbs. • Compression: 9.5:1 • Block: Ford Aluminum • Crankshaft: Forged • Pistons: Mahle Forged Aluminum • Rods: Manley Forged H-Beam • Camshafts: Stock Ford • Rocker Arms: Stock Ford 2-1 Ratio • Induction: E-Force Supercharger System • Cylinder Heads: Stock Four-Valve Aluminum w/ Boss 302 valve springs • Warranty: 2-year / Unlimited mileage.

-2011 Ford F-150-2011 Ford Mustang-2012 Ford F-150-2012 Ford Mustang-2013 Ford F-150-2013 Ford Mustang-2014 Ford F-150-2014 Ford Mustang-2015 Ford F-150-2015 Ford Mustang-2016 Ford F-150-2016 Ford Mustang-2017 Ford F-150-2017 Ford Mustang-2018 Ford Mustang

Installation Notes    

    Crate engine #46890 includes an E-Force Supercharger, wiring harness, pre-programmed ECU, electronic throttle pedal, oxygen sensors, MAFS, OBD-II diagnostic port, air filter, fuse box, water pump, hose, alternator, belts, idlers and hardware.
    This engine will require an EFI compatible fuel delivery system with a minimum flow of 90 gph @ 70 PSI. Fuel pressure regulator with boost reference is required.
    Top of supercharger measures 20.83" from crank centerline.
    Supplied with Edelbrock Break-In Oil. Before starting engine, you will need to prime the oil system. Do not turn engine over with starter motor for priming.

California Residents: Proposition 65 Warning

Vehicle Fitment

This product will fit the following Bronco years:

This product will fit the following F-100 years:

  • 1948,
  • 1949,
  • 1950,
  • 1951,
  • 1952,
  • 1953,
  • 1954,
  • 1955,
  • 1956,
  • 1957,
  • 1958,
  • 1959,
  • 1960,
  • 1961,
  • 1962,
  • 1963,
  • 1964,
  • 1965,
  • 1966,
  • 1967,
  • 1968,
  • 1969,
  • 1970,
  • 1971,
  • 1972,
  • 1973,
  • 1974,
  • 1975,
  • 1976,
  • 1977,
  • 1978,
  • 1979,

This product will fit the following F-150 years:

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.