Eibach Spring Pro-Kit Set Mustang V6 2015-2017/ EcoBoost 2015-2022
Highlights
- Progressive Spring Design
- Lowers Center Of Gravity
- Reduces Body Roll
- Performance Handling
Set of Four Eibach Pro-Kit Springs for 2015, 2016 and 2017 V6 Mustangs and 2015, 2016, 2017, 2018, 2019, 2020, 2021 and 2022 EcoBoost Mustangs.
Eliminate that annoying wheel gap and dramatically improve your 2015-2022 V6 or EcoBoost Mustang’s performance! With Eibach’s brand new Set of Four Pro-Kit Springs, you can get that aggressive stance all enthusiasts love!
Features and Benefits:
- 1.1”-1” Drop for V6/EcoBoost Fastback Mustangs
- Proprietary, Progressive Spring Design
- Lower Center of Gravity
- Excellent Ride Quality
- Decreases Squat During Acceleration
- Limits Excessive Nose-Dive When Braking
- Reduces Body Roll While Cornering
- Improved Aerodynamic Efficiency for Improved Gas Mileage
These springs will reduce squat during acceleration, limit nose-dive while braking, reduce body roll during cornering and maneuvering and also reduce excessive fender-well clearance, making your Mustang look just as impressive as it performs. And, as everyone has learned from racing and independent testing, lowering your vehicle’s ride height improves the aerodynamic efficiency by forcing more air over the car and less underneath, where most of the drag is found, resulting in higher top speeds on the track and better MPG on the highway.
By using a proprietary, progressive spring design, these performance springs provide the ultimate balance to take your passion for driving to a whole new level. The ride height will move your Mustang a welcome 1.1”-1” lower towards the ground when you install these high-quality Eibach Pro-Kit Springs on your S550.
The lowered ride height helps to distribute stress more evenly and provides an improved ride quality. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro-Kit Springs become that extra special touch for great, all out performance and appearance results in your 2015-2022 Mustang!
Please Note: This kit does NOT fit EcoBoost models equipped with the Performance Handling Pack or the factory MagneRide Suspension.
Tech Tip: CJ Pony Parts recommends getting an alignment after installation to ensure your Mustang's specs are in check. Otherwise, your tires may wear improperly.
Vehicle Fitment:
- 2015-2017 Fastback and Convertible V6 Mustang
- 2015-2022 Fastback and Convertible EcoBoost Mustang
*NOT designed for use with GT or Bullitt Mustangs.
Front End Alignment Specifications:
- OE Camber: -0.8 deg (+/- 0.8 deg)
- OE Caster: 7.2 deg (+/- 0.8 deg)
- OE Toe: 0.0 deg (+/- 0.2 deg)
- Pro-Kit Camber: -1.0 deg
- Pro-Kit Caster: 7.5 deg
- Pro-Kit Toe: 0.2 deg
Rear End Alignment Specifications:
- OE Camber: -1.2 deg (+/- 0.8 deg)
- OE Caster: N/A
- OE Toe: 0.1 deg (+/- 0.2 deg)
- Pro-Kit Camber: -1.4 deg
- Pro-Kit Caster: N/A
- Pro-Kit Toe: 0.2 deg
Lowering Specs:
- 1.1" Front and 1.0" Rear Drop for V6 and EcoBoost Fastback Mustang
- 1.2" Front and 1.2" Rear Drop for V6 and EcoBoost Convertible Mustang
California Residents: Proposition 65 Warning
Installation Videos
Video Transcript
Eibach engineered these lowering springs specifically for your EcoBoost or V6 Mustang and it will fit both body styles of the 2015. They're going to lower the front of the Mustang 1" and the rear 1.1" to give you a nice, flat, level stance. They include a set of four coiled springs, dust boots, as well as bump stops.
You can improve the look of your 2015 Mustang V6 or EcoBoost, and at the same time improve the handling with a set of Eibach's Pro-Kit springs.
