Eibach Suspension Kit Pro-Plus GT 2015-2021

Eibach:
35145.880
Rating:
80% of 100

Highlights

  • Red Powder Coat Finish
  • Performance Tuned Handling
  • Reduces Body Roll
  • Progressive Spring Design
MSRP $1,005.55
$769.25
You save 23%

Eibach Pro-Plus Suspension Kit for all 2015, 2016, 2017, 2018, 2019, 2020 and 2021 GT Mustangs.

Owning a Mustang isn't all about driving in a straight line. With the introduction of independent rear suspension, Ford has adjusted their focus of the 2015-2021 Mustang to include carving through those turns. If that's what you crave, then Eibach's Pro-Plus Suspension Kit delivers. This suspension kit includes front and rear sway bars to stiffen body roll and a set of performance springs for a lowered, aggressive stance.

Pro-Plus Kit Includes:
- Eibach 35mm Adjustable Front Sway Bar
- Eibach 25mm Adjustable Rear Sway Bar
- Eibach Pro-Plus Springs
- Urethane Bushings
- Instructions
- All Necessary Mounting Hardware

This suspension kit includes Eibach's Pro-Kit springs along with the matching Anti-Roll Kit sway bars. This Pro-Plus suspension kit is an all-in-one solution to your handling woes. The Pro-Kit springs lower your car's center of gravity, reduce squat during acceleration while virtually eliminating nose-dive under hard braking. To add to the fun, the Anti-Roll sway bars stiffen your entire car and drastically reduce body roll in hard corners for an all-around balanced driving experience.

Eibach Anti-Roll Kit Sway Bars Features and Benefits:
- Each Sway Bar Features 3 Adjustable Positions
- Finished in a Long-Lasting Red Powder Coat Finish
- Manufactured from Cold-Formed, High-Strength Aircraft-Grade Steel
- Precision Engineered for Eibach Pro-Kit & Sportline Performance Lowering Spring Kits
- Perfectly Balanced for Optimum Neutral-Steering Handling and Precise Turn-In Response
- Performance Tuned Handling
- Drastically Reduce Body Roll
- Precision Forged Ends on OEM Style Pressed Bushing Locators
- Greaseable Urethane Bushings for Increased Responsiveness

Constructed from the highest quality aircraft-grade steel, these three point adjustable sway bars provide the rigidity and modifiable capabilities necessary to deliver specific levels of control and maneuverability without replacing the entire sway bar. The three points of adjustment, either lengthening or shortening the lever arms, allow in some cases, up to 5 distinct stiffness settings for precise handling bias adjustment on your 2015-2021 GT Mustang.

The Anti-Roll sway bars combine both the front and rear sway bars from Eibach for an all-around solution to reduce body roll through increased stiffness over the stock sway bars. The result is increased handling and cornering grip in any performance-driving situation. Manufactured from cold-formed, high-strength aircraft-grade steel for precision performance, the anti-roll sway bars are finished in a durable red powder coat finish. This suspension kit also comes complete with greased urethane bushings for improved responsiveness with all mounting hardware and instructions included for an easy installation.

Most sway bars on the market are steel non-spring bars. These heavy-duty high-strength aircraft-grade steel bars result in cornering loads that are spread more evenly across the tires, thus providing additional grip and control. Your 2015-2021 GT Mustang will also show improved tire wear, as your tires stay flatter and more upright with this suspension kit from Eibach. This decreases movement and increases comfort inside the vehicle, because your car stays more flat and controlled through turns.

Eibach Pro-Kit Springs Features and Benefits:
- Proprietary, Progressive Spring Design
- 1”-1.1” Drop for GT Coupe Mustang
- Lower Center of Gravity
- Reduce Squat During Acceleration
- Limits Excessive Nose-Dive When Braking
- High Performance and Fierce Appearance
- Reduces Body Roll While Cornering
- Excellent Ride Quality
- Corner Faster, Stop Quicker and Handle More Precisely
- Improved Aerodynamic Efficiency

Please Note: The springs included in this kit will NOT fit vehicles that are equipped with the factory MagneRide suspension or 2018-2021 Performance Package Models.

Eibach's Pro-Kit springs will reduce squat during acceleration, limit nose-dive while braking, reduce body roll during cornering and maneuvering and also reduce excessive fender-well clearance, making your Mustang look just as impressive as it performs. By using an advanced proprietary, progressive spring design, these performance springs provide the ultimate balance to take your passion for driving to a whole new level. The lowered ride height helps to distribute stress evenly and provide an improved ride quality. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro-Kit Springs become that extra special touch for great, all out performance and appearance results in your 2015-2021 Mustang!

The ride height will move a welcome 1.1” lower towards the ground when you install these high-quality Eibach Pro-Kit Springs for the 2015-2018 GT Mustangs. As everyone has learned from racing and independent testing, lowering your vehicle’s ride height improves the aerodynamic efficiency by forcing more air over the car and less underneath, where most of the drag is found, resulting in higher top speeds on the track and better MPG on the highway.

This suspension kit from Eibach is the perfect answer for most street driven cars that want to step up the handling and control levels for great performance results combined with a great new appearance. Each set of Eibach Pro-Kit Springs and Anti-Roll Sway Bars are designed and tested by suspension engineers and performance driving professionals to deliver intimidating good looks and high performance handling, without ever compromising the safety or ride quality of your 2015-2018 Mustang.

Please Note: This kit does NOT fit GT or Bullitt models equipped with the Performance Pack Level 2 or the factory MagneRide Suspension, please see P/N: E43350290722 (E43-35-029-07-22).

Lowering Specs:
- 1.1" Front and 1.0" Rear Drop for GT and Bullitt Fastback Mustang
- 1.2" Front and 1.1" Rear Drop for GT Convertible Mustang

Vehicle Fitment:
- 2015-2021 Fastback and Convertible GT Mustang
- 2019-2020 Bullitt Mustang

*NOT designed for use with V6 or EcoBoost Mustangs

California Residents: Proposition 65 Warning

Installation Difficulty

Moderate
Moderate

Intermediate skill is required for this installation.

Installation Videos

Video Transcript

We’re here with Eibach's Pro Plus suspension kit fitting your 2015 Mustang GT.

The Eibach Pro Plus kit will take the handling of your 2015 Mustang GT to the next level. It starts off with the Eibach Pro kit springs. Will lower your Mustang 1" in the front and approximately 1.1" in the rear. The kit includes all four coil springs, four bump stops, as well as new dust boots for the strut. The next step is going to be the Eibach sway bar kit. This comes with both front and rear sway bars, 35mm in the front, 25mm in the rear. Both are three-way adjustable and include new bushings for mounting.

This Eibach Pro Plus suspension kit's going to give you everything you need to confidently lower your 2015 Mustang GT while decreasing body roll and increasing handling.

Vehicle Fitment

This product will fit the following Mustang years:

Only registered users can ask/answer questions. Please sign in or create an account.
Write Your Own Review
Only registered users can write reviews. Please sign in or create an account.
Complete Your Package
Add to Cart