Exhaust Tailpipe 2-1/4" Passenger Side Dual Exhaust 351C 1965-1973

CJ's Part Number: EX3TR
CJ's Low Price:
$44.99
1508284800 12955
Make sure you get a new exhaust tailpipe for your Mustang's driver side too!
Earn 44 RPM Points What's this?
Exhaust Tailpipe 2-1/4" Passenger Side Dual Exhaust 351C 1965-1973

Product Description

Passenger Side 2-1/4" Exhaust Tailpipe for 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mustangs with a 351C Engine and Dual Exhaust.

If you're restoring your 1965-1973 Mustang's exhaust system, then you're going to need the correct parts to get the job done right. Thankfully, CJ Pony Parts carries this 2-1/4" exhaust tailpipe specifically made for the passenger side of your Pony!

This Passenger Side 2-1/4" Exhaust Tailpipe is made out of sturdy aluminized steel. It connects to your Mustang's mufflers and exits at the rear.

Please Note: This exhaust tailpipe is for the passenger side of 1965-1973 Mustangs with a 351C engine and dual exhaust only. If you need an exhaust tailpipe for the driver side, please see CJ Pony Parts # EX3TL.

*This exhaust tailpipe will NOT work with staggered shocks.

One of the keys to a great sounding and high performing Mustang is finding and installing a good Mustang exhaust. CJ Pony Parts offers many parts that allow you to upgrade your existing exhaust or install a whole new exhaust system. Once you make this upgrade, enjoy your Mustang's fantastic new sound as you cruise down the road.

Order a Passenger Side 2-1/4" Exhaust Tailpipe for your 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972 or 1973 Mustang with a 351C Engine and Dual Exhaust from CJ Pony Parts today!

Similar Mustang Parts

similar Mustang parts More Individual Exhaust Pipes  

Installation Instructions

Mustang Installation

Mustang Applications

This product will fit the following Mustang years:

Product Reviews

Write a review
Exhaust Tailpipe 2-1/4" Passenger Side Dual Exhaust 351C 1965-1973 is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Good Fit This passenger tail pipe fit well on my 351C Mach1 using the original stock hanger and muffler placement. The only modifications done was at the end of the pipe. I reduced back another 1-1/2" and expand the reduction slightly to get the proper chrome tip placement and tighter fit. The online description says this pipe does not fit a staggered stock setup, but worked for me.
Date published: 2017-08-12
  • y_2017, m_10, d_17, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_EX3TR, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 49.97ms
  • REVIEWS, PRODUCT

Product Questions

These pipes were back ordered in my purchase for a 1969 351w mustang. Did the 1969 351w and 1970 351c use the same tailpipes? 

Asked by: Nick95
No, they are different.
Answered by: rk cjpp
Date published: 2016-11-30

will this work on my 64.5 260?

Asked by: rst429
No, it only works on 351C engines.
Answered by: CJ Pony Parts
Date published: 2015-09-11
  • y_2017, m_10, d_17, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_en_US, sid_EX3TR, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.0
  • CLOUD, getContent, 46.05ms
  • QUESTIONS, PRODUCT

You Might Also Like