Exterior LED Light Kit 1965-1966

CJ's Part Number:
LEDK
Exterior LED Light Kit 1965-1966 is rated 5.0 out of 5 by 2.
  • y_2019, m_10, d_16, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_LEDK, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 139.17ms
  • REVIEWS, PRODUCT
MSRP $265.62
$255.99
You save $9.63

Exterior LED Light Kit for all 1965-1966 Mustangs.

Upgrade the exterior lights on your 1965-1966 Mustang with this LED light kit. LED lights are a great way to visually enhance the appearance of your Mustang while improving safety on the road. LED lights glow white when illuminated and are much brighter than standard bulbs. The LED lights are a great improvement over original factory bulbs.

Kit Includes:
-LED Taillight Assembly (2)
-LED Amber Parking Light Assembly (2)
-LED Back Up Light Kit

Please Note: When using LED lights, your stock flasher mechanism cannot engage properly, due to less heat given off from the LED bulbs than the original bulbs. HW2811 is a two terminal flasher that allows your flashers/turn signals to work properly when using LED style lights.

Vehicle Fitment

This product will fit the following Mustang years:

Rated 5 out of 5 by from Great Kit Great kit, lights install easily and shine great. You'll need to update your flasher relay(CJ's Part Number: HW2811) in order for the directional indicators to work properly. If your front directional do not properly after installation you'll need a FAL Switch Bulb (see kit Scott Drake: SD-6456-GA-BL on this site) to replace the turn signal indicator light in the dash board
Date published: 2015-02-19
Rated 5 out of 5 by from Beautiful Bright very bright. Got these to replace regular bulbs. Much brighter especially the tail lights. Visibility is great during the day light hours.
Date published: 2016-04-22
  • y_2019, m_10, d_16, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_LEDK, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.62ms
  • REVIEWS, PRODUCT

Does this kit replace the tail light bucket where that old bucket would be removed or does this sit on top of the OEM bucket?

Asked by: erik5oh
This reuses the existing taillight bucket.
Answered by: rk cjpp
Date published: 2019-06-10

Will the 4 way flasher work with this kit ? Thanks

Asked by: Tang66
You would need to replace that flasher also.
Answered by: rk cjpp
Date published: 2018-07-01

will these lights work with the factor wires or do the need a updated wiring harness?

Asked by: gnh2194
They will work with your factory wiring, but you need to include CJ's part number HW2811 in your order, as you need that two terminal flasher to allow the turn signals to flash at a normal speed.
Answered by: CJ Pony Parts
Date published: 2015-01-16
  • y_2019, m_10, d_16, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.13
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_en_US, sid_LEDK, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_cjponyparts
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 142.69ms
  • QUESTIONS, PRODUCT