This Fabtech 3" Lift Kit (K2383) is a simple way to provide clearance for 35" tires, with reliable quality and strength. These kits are designed for the Bronco owner that wants to occasionally enjoy offroad use.
Features and Benefits:
- Eliminates upper ball joint
- Super strong 1″ ID Stainless American Uniball
- Uniball pin fits into factory ball joint taper without modification to the spindle
- Retains stock Coilover shocks for a factory ride
- Heavy Duty Track Bar bracket
- Re-centers axle under the vehicle for proper tracking
Fabtech’s high-quality 3" Bronco lift kit offers increased height to run 35" tall tires with additional front suspension strength. This kit helps level the vehicle stance front to rear for a more aggressive appearance.
The factory Bronco upper control arms are replaced with Fabtech’s Uniball Upper Control Arms that provide additional wheel travel with an extra degree of caster compared to stock arms. The increased caster helps to balance steering effort with oversized tires.
The Fabtech upper control arms are constructed of the finest material with .120" wall 1.25" OD 4130 Chromoly steel tubing. High-quality 1" FK Stainless PTFE lined Uniball bearings are utilized in place of the small factory ball joints and allow for increased travel without binding.
The factory front and rear Coilover shocks are retained, and receive spacers that provide height while maintaining the comfortable stock highway ride quality. With the increased ride height, the rear axle becomes offset to the vehicle. Fabtech addresses this with a heavy-duty track bar relocation bracket that re-centers the axle under the vehicle.
Please Note: Designed for use on 4 door models only. Fits models equipped with factory Bilstein shocks only.