Fabtech Spacer Lift Kit 3" With Shock Extensions 3.6L 4-Door Jeep Wrangler JL 2018-2020

Fabtech:
K4100
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 114.82ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
MSRP $659.00
$527.20
You save 20%

Fabtech 3" Spacer Lift Kit with Shock Extensions for 2018, 2019 and 2020 4-Door Jeep JL Wranglers with a 3.6L Engine.

Before you dive into the deep end of the lift kit pool for your 2018-2020 4-Door Jeep JL Wrangler with a 3.6L Engine, think about this Fabtech K4100 3" Spacer Lift Kit with Shock Extensions. This spacer lift kit is considered an entry level system to be used with the oversized tires on your Wrangler JL when you want to maintain factory ride quality while adding significant ground clearance.

Features and Benefits:
- Entry level lift system
- Maintains factory ride
- Allows for oversized tires (consult the list below for size specs)
- Heavy-duty components
- Front steel and rear billet coil spring spacers retain stock coils
- Easy installation

Kit Includes:
- Front and Rear Coil Spring Spacers
- Front and Rear Sway Bar Links
- Front and Rear Bump Stop Extensions
- Rear Track Bar Brackets
- E-Brake Bracket
- Front and Rear Shock Extensions

Economically priced, this spacer lift kit maintains the factory ride you’re accustomed to on the road or off. The system includes front steel and rear billet coil spring spacers that will retain the stock coils while the four bump stops extensions control the travel within the factory specifications. Featuring urethane bushings, the extended length front and rear sway bar links re-position the bars to work within the factory operating planes. To prevent binding at full extension when the links and sway bar go over center, extended rear sway bar links are provided. The included heavy-duty rear track bar bracket re-centers the axle while simultaneously retaining the factory roll center of the vehicle with significantly increased ride height. To contribute to factory ride retention, this system includes heavy duty shock mount extensions that bolt in place. This is a great entry level system for those that want clearance for oversized tires while retaining your factory ride quality or upgrading the shocks.

Tire and Wheel Sizes with Stock Fenders:
- Tire Size: 35/12.50R17, Wheel Size: 17X9 with 4-1/2” BS with minor trimming
- Tire Size: 35/12.50R17, Wheel Size: 18X9 with 4-1/2” BS with minor trimming
- Tire Size: 325/65R18, Wheel Size: 18X9 with 4-1/2” BS with minor trimming
- Tire Size: 35/12.50R20, Wheel Size: 20X9 with 5” BS with minor trimming
- Tire Size: 325/60R20, Wheel Size: 20X9 with 5” BS with minor trimming

Tire and Wheel Sizes with Tube Fenders:
- Tire Size: 37/12.50R17, Wheel Size: 17X9 with 4-1/2” BS with cutting
- Tire Size: 37/12.50R18, Wheel Size: 18X9 with 4-1/2” BS with cutting
- Tire Size: 37/12.50R20, Wheel Size: 20X9 with 5” BS with cutting

Whether you are an active off-roader or if you use your vehicle as a daily driver, CJ Pony Parts is dedicated to helping you find the perfect Fabtech suspension upgrades for your rugged pickup Jeep JL Wrangler. If you are searching for the best Fabtech suspension parts, look no further than CJ’s today!

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Wrangler years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.06ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 107.7ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;