Falcon Performance Shocks Lift Shock Absorber System Sport For 2" Lift Toyota Tacoma 2005-2018

Falcon Performance Shocks:
08-04-21-400-100
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 31.42ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$1,425.99

Falcon Performance Shocks Sport Lift Shock Absorber System for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Toyota Tacomas with a 2" Lift.

If you’ve put a 2" lift kit on your 2005-2018 Toyota Tacoma, you’re going to need some new aftermarket front and rear shocks for it too. So be sure to pick up this Falcon Performance Shocks Sport Lift Shock Absorber System from CJ Pony Parts! 

Features & Benefits:
- Delivers Increased Stability and Control and Improved Ride Quality and Comfort On and Off Road
- Ideal for Daily Driven Vehicles
- Dramatic Improvement in On-Road Comfort and Off-Road Performance
- Optimized Fitment for Clearance During Full Suspension Travel
- Zone Rate Tuning (ZRT): Manipulates Factory Linear-Rate Spring Tuning to Produce 3 Distinct Performance Zones with More Exaggerated Spring Curve to Tackle Various Driving Conditions
- Internal Negative-Rate Spring Offsets Factory Spring’s Preload While in Extension Zone to Eliminate Top Out Clunk and Shock Stress at Full Extension While Softening Tire Landing and Reducing Body Roll on Impact During Aggressive Driving
- Factory Spring Rate Unaffected in Drive Zone for Comfortable, Controlled Ride
- Provided Progressive Microcellular Bump Stop Effectively Re-Tunes Spring Rate While in Compression Zone to Reduce Bottoming and Body Roll During Aggressive Driving
- Proprietary Volume Optimized Damping (VOD): Digressive Linear Valve Produces Quicker Ramp-Up for Increased Damping Volume for Better Vehicle Feedback and Control During Low-Speed Driving
- VOD Improves Shock Absorber’s Ability to Reduce Bottoming Out at Full Compression During Faster Speeds or Over Uneven Terrain
- Application-Specific Tuned Bump Stop Reduces Bottoming Out and Body Roll
- Installation Time: 3.5 Hours 

This Falcon Performance Shocks (08-04-21-400-100) Sport Lift Shock Absorber System is just what you need to get better stability and control out of your pick-up, and it’s a great choice for daily drivers. These front and rear shock absorbers offer better on-road comfort and off-road performance. 

Falcon Sport Tow/Haul Shocks Features & Benefits:
- Front Leveling Monotube Shock Absorbers with Fixed Rate Damping Optimized for On- and Off-Road Driving
- Rear Long-Travel Piggyback (Tacoma) Shock Absorbers with Fixed Rate Damping Optimized for On- and Off-Road Driving
- 1-1/4" Lift Rear Leaf Spring Blocks
- Piggyback Design Has Increased Oil and Gas Capacity vs. Monotube or Twin-Tube Designs Reducing Heat Build-Up for More Consistent Performance
- Piggyback Fluid Passage Design Flows 6x More Oil than Restrictive Reservoir Hose Designs and Eliminates Common Leakage Issues Found in Banjo and Swivel Fittings
- All Testing Done on E-Rated Tires (Worst Possible Ride)
- Front Shock Has Multiple Snap Ring Grooves to Level Out Front End
- Snap Ring Grooves Maintain Set Ride Height (Instructions Laser-Etched on Shock Body)
- Largest Shock Body that Will Fit without Modifications
- High-Quality Spherical Bushings (When Applicable)
- Zerk Fittings to Lube Bushing (When Applicable)
- Race-Inspired Performance for Increased Vehicle Stability
- 2-1/4" Shock Body Provides Optimal Performance
- 6061-T6 Aluminum Alloy Shock Body Resists Wear and Protects Internal Components While Providing Superior Heat Dissipation
- Smooth Honed Internal Shock Body Surface for Long-Term Performance
- 3/4" Induction Hardened Chrome-Plated Shaft Resists Rock Damage and Corrosion and Prevents Shaft Buckling
- Maximum Shaft Diameter Allows for More Precise Tuning
- Hard Anodized Billet Piston
- 1-Piece Teflon Bronze Piston Wear Band with O-Ring
- Inline OGS (Oil/Gas Separator) Prevents Cavitation
- Red Line Full Synthetic Shock Oil with High Viscosity Index of 519 for Consistent Performance Across All Temperatures and Reduced Shock Fade
- Synthetic Formula Also Contains Special Anti-Wear and Lubricity Agents for Excellent Thermal Stability
- 1,000-Hour Salt Spray Corrosion-Resistance Test on All Hardware
- Serviceable and Rebuildable (Factory Serviced)
- Built In-House at TeraFlex Falcon Shock Division 

This Kit Includes:
Front Components:
- Leveling Monotube Shock Absorbers
- Progressive Microcellular “Foam” Bump Stops
- Billet Coil Spring Carrier
- Injection-Molded Squeak-Free Spring Isolator
- All Necessary Hardware 

Rear Components:
- Long-Travel Piggyback Shock Absorbers
- 1-1/4" Lift Leaf Spring Blocks
- Progressive Microcellular “Foam” Bump Stops
- Bump Stop Cups
- Roost Guards
- All Necessary Hardware 

*Never exceed factory tow/haul ratings. 

Order a Falcon Performance Shocks (08-04-21-400-100) Sport Lift Shock Absorber System for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Toyota Tacoma with a 2" Lift from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Tacoma years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 6.61ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 30.48ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;