Falcon Performance Shocks Lift Shock Absorber System Sport Tow/Haul 2" Toyota Tacoma 2005-2018

Falcon Performance Shocks:
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 122.05ms
  • bvseo-msg: HTTP status code of 404 was returned;

Falcon Performance Shocks 2" Sport Tow/Haul Lift Shock Absorber System for 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 and 2018 Toyota Tacomas.

If you use your 2005-2018 Toyota Tacoma as more than just your daily driver, consider upgrading the suspension with something that will make hauling and towing much easier. This 2” Sport Tow/Haul Lift Shock Absorber System (04-04-32-400-100) from Falcon Performance Shocks will give you the ability to choose the mode you need for your rear shocks, depending on the task at hand.

This Lift Shock Absorber System combines monotube front shock absorbers with adjustable piggyback rear shock absorbers. The rear shocks have a three-position fast adjust knob that lets you select from comfort and control, moderate tow/haul and heavy tow/haul settings. This system is a great aftermarket kit to better use your Tacoma for hauling and towing!

Lift Height:
- Front: 0-2.25”
- Rear: 1.25”

Lift Kit Includes:
Front Components:
- Leveling monotube shock absorbers
- Progressive microcellular “foam” bump stops
- Billet coil spring carrier
- Injection molded squeak-free spring isolator
- All necessary hardware

Rear Components:
- Long-travel adjustable piggyback shock absorbers
- 1.25” lift leaf spring blocks
- Progressive microcellular “foam” bump stops
- Bump stop cups
- Roost guards
- All necessary hardware

Falcon Sport Tow/Haul 2” Lift:
- Front leveling monotube shock absorbers with fixed rate damping optimized for on- & off-road driving
- Rear adjustable piggyback shock absorbers with Fast Adjust Knob with 3 settings for large damping adjustments
- Rear adjustment settings include: Comfort & Control, Moderate Tow/Haul, & Heavy Tow/Haul
- 1.25” lift rear leaf spring blocks

Piggyback Shock Absorbers:
- Piggyback design has increased oil & gas capacity vs. monotube or twin-tube designs reducing heat buildup for more consistent performance
- Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose designs, and eliminates common leakage issues found in banjo & swivel fittings

Falcon Truck Shocks:
- All testing done on E-rated tires (worst possible ride)
- Front shock features multiple snap ring grooves to level out front end
- Snap ring grooves maintain set ride height (instructions laser etched on shock body)
- Largest shock body that will fit without modifications
- Zone Rate Tuning (ZRT) retunes the factory spring in the Extension, Drive & Compression zones
- Negative spring inside shock body eliminates top out clunk, softens tire landing, & reduces body roll & stress on shock
- Application-specific tuned bump stop reduces bottoming out & body roll
- High-quality spherical bushings (when applicable)
- Zerk fittings to lube bushing (when applicable)

All Falcon Shocks:
- Vehicle-specific shock absorbers
- Race-inspired performance for increased vehicle stability
- Improved dynamic roll control & low speed damping
- Dramatic improvement in on-road comfort & off-road performance
- Optimized fitment for clearance during full suspension travel
- 2.25” shock body provides optimal performance
- 6061-T6 aluminum alloy shock body resists wear & protects internal components while providing superior heat dissipation
- Smooth honed internal shock body surface for long-term performance
- 3/4” induction hardened chrome plated shaft resists rock damage & corrosion as well as prevents shaft buckling
- Maximum shaft diameter allows for more precise tuning
- Hard anodized billet piston
- 1-piece Teflon bronze piston wear band with O-ring
- Digressive linear piston & base valve technology
- Volume Optimized Damping (VOD) features a digressive linear piston for quicker ramp up & increased damping volume
- Inline OGS (Oil/Gas Separator) prevents cavitation
- Red Line full synthetic shock oil with high viscosity index of 519 for consistent performance across all temperatures & reduced shock fade
- Synthetic formula contains special anti-wear & lubricity agents for excellent thermal stability
- 1,000-hour salt spray corrosion resistance test on all hardware
- Serviceable & rebuildable (factory serviced)
- Built in-house at the TeraFlex Falcon Shock Division

*Never exceed factory tow/haul ratings.

Please Note: Do not use tow/haul modes while unladen as the increased rear stiffness could upset the balance between the front and rear of the vehicle, which could lead to loss of vehicle control.

Order a Falcon Performance Shocks (04-04-32-400-100) 2" Sport Tow/Haul Lift Shock Absorber System for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 Toyota Tacoma from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following Tacoma years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.46ms
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 130.43ms
  • bvseo-msg: HTTP status code of 404 was returned;