Falcon Performance Shocks Lift Shock Absorber System Sport Tow/Haul For 4" To 6" Lift F-150 2015-2019

Falcon Performance Shocks:
05-04-32-400-406
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 210.68ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$1,549.99

Falcon Performance Shocks Sport Tow/Haul Lift Shock Absorber System for 2015, 2016, 2017, 2018 and 2019 F-150s with a 4" to 6" Lift.

If you need some newer, higher-quality aftermarket front and rear shocks to go with your 2015-2019 lifted F-150, then it’s time to pick up this Falcon Performance Shocks Sport Tow/Haul Lift Shock Absorber System from CJ Pony Parts! 

Features & Benefits:
- Pairs Monotube Front Shock Absorbers with Adjustable Piggyback Rear Shock Absorbers
- Rear Shocks Have 3-Position Fast Adjust Knob: Select from Comfort & Control, Moderate Tow/Haul or Heavy Tow/Haul
- Designed to Fit Existing 4" to 6" Lift Kit
- Longer Front Shock Body Provides Better Fitment by Eliminating Need for Upper Strut Spacer Block
- Front Shocks Fit All Drop Bracket Lift Kits with Extended Knuckles
- Rear Shocks Must be Used with Included Rear Bump Stops, Bump Stop Cups and Existing Lift Kit’s Bump Stop Blocks
- Zone Rate Tuning (ZRT): Manipulates Factory Linear-Rate Spring Tuning to Produce 3 Distinct Performance Zones with More Exaggerated Spring Curve to Tackle Various Driving Conditions
- Internal Negative-Rate Spring Offsets Factory Spring’s Preload While in Extension Zone to Eliminate Top Out Clunk and Shock Stress at Full Extension While Softening Tire Landing and Reducing Body Roll on Impact During Aggressive Driving
- Factory Spring Rate Unaffected in Drive Zone for Comfortable, Controlled Ride
- Provided Progressive Microcellular Bump Stop Effectively Re-Tunes Spring Rate While in Compression Zone to Reduce Bottoming and Body Roll During Aggressive Driving
- Proprietary Volume Optimized Damping (VOD): Digressive Linear Valve Produces Quicker Ramp-Up for Increased Damping Volume for Better Vehicle Feedback and Control During Low-Speed Driving
- VOD Improves Shock Absorber’s Ability to Reduce Bottoming Out at Full Compression During Faster Speeds or Over Uneven Terrain
- Installation Time: 3.5 Hours 

This Falcon Performance Shocks (05-04-32-400-406) Sport Tow/Haul Lift Shock Absorber System is just what you need to get superior ride comfort whether you’re on the road hauling a heavy load or going off-roading with your friends! You’ll get front monotube shocks along with adjustable piggyback rear shock absorbers that have a 3-position fast adjust knob, so you can easily dial in the type of ride you want: Comfort & Control, Moderate Tow/Haul or Heavy Tow/Haul. 

Please Note: This kit will NOT fit Raptors. 

Falcon Sport Tow/Haul Shocks Features & Benefits:
- Front Monotube Shocks with Multiple Snap Ring Grooves to Match Existing 4-6" Lift Kits and Level Out Front End
- Snap Ring Grooves Maintain Set Ride Height (Instructions Laser-Etched on Shock Body)
- Longer Front Shock Body Provides Better Fitment by Eliminating Upper Strut Spacer Block
- Front Shocks with Fixed Rate Damping Optimized for On- and Off-Road Driving
- Replacement Dampers for Drop Bracket Lift Kits Utilizing Extended Knuckles
- Long-Travel Rear Shocks for Existing 4-6" Lift Kits
- Race-Inspired Performance for Increased Vehicle Stability
- Dramatic Improvement in On-Road Comfort and Off-Road Performance
- All Testing Done on E-Rated Tires (Worst Possible Ride)
- Optimized Fitment for Clearance During Full Suspension Travel
- 2-1/4" Shock Body Provides Optimal Performance
- 6061-T6 Aluminum Alloy Shock Body Resists Wear and Protects Internal Components While Providing Superior Heat Dissipation
- Smooth Honed Internal Shock Body Surface for Long-Term Performance
- Largest Shock Body that Will Fit without Modifications
- 3/4" Induction Hardened Chrome-Plated Shaft Resists Rock Damage and Corrosion and Prevents Shaft Buckling
- Maximum Shaft Diameter Allows for More Precise Tuning
- Hard Anodized Billet Piston
- 1-Piece Teflon Bronze Piston Wear Band with O-Ring
- Inline OGS (Oil/Gas Separator) Prevents Cavitation
- High-Quality Spherical Bushings (When Applicable)
- Zerk Fittings to Lube Bushing (When Applicable)
- Red Line Full Synthetic Shock Oil with High Viscosity Index of 519 for Consistent Performance Across All Temperatures and Reduced Shock Fade
- Synthetic Formula Also Contains Special Anti-Wear and Lubricity Agents for Excellent Thermal Stability
- 1,000-Hour Salt Spray Corrosion-Resistance Test on All Hardware
- Serviceable and Rebuildable (Factory-Serviced)
- Built In-House at TeraFlex Falcon Shock Division 

This Kit Includes:
Front Components:
- 4-6" Lift Leveling Monotube Shock Absorbers
- Progressive Microcellular “Foam” Bump Stops
- Billet Coil Spring Carrier
- Injection-Molded Squeak-Free Spring Isolator
- All Necessary Hardware 

Rear Components:
- 4-6" Lift Adjustable Piggyback Shock Absorbers
- Progressive Microcellular “Foam” Bump Stops
- Bump Stop Cups
- Bump Stop Landing Pads
- Roost Guards
- All Necessary Hardware 

*Rear shocks require existing lift kit’s rear bump stop blocks.
*Never exceed factory tow/haul ratings.
*Do not use tow/haul modes while unladen as the increased rear stiffness could upset the balance between the front and rear of the vehicle, which could lead to loss of vehicle control. 

Order a Falcon Performance Shocks (05-04-32-400-406) Sport Tow/Haul Lift Shock Absorber System for your 2015, 2016, 2017, 2018 or 2019 F-150 with a 4" to 6" Lift from CJ Pony Parts today!

Vehicle Fitment

This product will fit the following F-150 years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.83ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 258.97ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;