Falcon Performance Shocks Piggyback Shock Absorber Kit 3.3 Fast Adjust For 0" To 1-1/2" Lift 2-Door Jeep Wrangler JL 2018-2019

Falcon Performance Shocks:
10-01-33-400-000
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 132.84ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$1,599.99

Falcon Performance Shocks Fast Adjust 3.3 Piggyback Shock Absorber Kit for 2018-2019 2-Door Jeep JL Wranglers with a 0" to 1-1/2" Lift.

If you’re looking to even out the ride quality, performance and handling in your raised rig, this Falcon Performance Shocks 10-01-33-400-000 Fast Adjust 3.3 Piggyback Shock Absorber Kit is a great way to achieve your goal. Specifically designed to work with your 2018-2019 2-Door Jeep JL Wrangler with a 0" to 1-1/2" Lift, this aftermarket shock absorber kit is designed and developed on American soil to give you the on- or off-road performance you’re looking for.

Features and Benefits:
- Falcon Series 3.3 Fast Adjust Piggyback Shock Absorbers can be tuned for specific terrain and handling
- Fast Adjust Knob with 3 compression settings for large damping adjustments
- Micro Position Dial with 8 compression settings for finer damping adjustments
- Ideal for daily driven Jeeps as well as the serious enthusiast
- JL/JLU corner-specific shock absorber with race-inspired performance
- Rear roost guards prevent shock shaft damage from rocks kicked up by the tires
- Piggyback design features increased oil and gas capacity
- Reduces heat buildup for more consistent performance
- Piggyback fluid passage design flows 6 times more oil than restrictive reservoir hose designs
- Eliminates common leakage issues found in banjo and swivel fittings
- Front shock features unique piggyback design with horizontal reservoir
- Increases clearance for large tires
- Increases vehicle stability
- Improved dynamic roll control and low speed damping
- Optimized fitment for clearance during full suspension travel
- 6061-T6 aluminum alloy shock body
- Resists wear and protects internal components while providing superior heat dissipation
- Smooth honed internal shock body surface for long term performance
- 2-1/4” shock body provides optimal performance
- 3/4” induction hardened chrome plated shaft
- Resists rock damage and corrosion as well as prevents shaft buckling
- Maximum shaft diameter allows for more precise tuning
- Hard anodized billet piston
- 1-piece Teflon bronze piston wear band with O-ring
- Digressive linear piston and base valve technology
- Inline OGS Oil/Gas Separator prevents cavitation
- Red Line full synthetic shock oil with high viscosity index of 519
- Consistent performance across all temperatures & reduced shock fade
- Synthetic formula also contains special anti-wear and lubricity agents for excellent thermal stability
- 1,000-hour salt spray corrosion resistance test on all hardware
- Serviceable and re-buildable (factory serviced)
- Built in-house at the TeraFlex Falcon Shocks Division

The included Fast Adjust knobs allow for quick damping changes from soft to firm, while the middle setting incorporates an eight-position Micro Adjust Dial for more precise tuning between soft and firm. To achieve a reduction in heat buildup and a reduced fade for a significant boost in overall performance, Falcon Piggyback shocks feature increased capacity for oil and the gas charge compared to monotube shocks. Falcon’s proprietary Volume Optimized Damping (VOD) features a digressive linear valve that produces quicker ramp up for increased damping volume, which improves vehicle feedback and control during low-speed driving. Additionally, VOD improves the shock absorber’s ability to reduce bottoming out at full compression during faster speeds or over uneven terrain. The construction elements also contribute to the best damping characteristics possible. These American made shock absorbers, designed specifically for your 2018-2019 Jeep JL Wrangler, deliver increased stability, improved ride quality and comfort for both every day Jeeps as well as race-inspired performance, handling and stability for your off-road rig. Manufactured with a focus on fitment and function, Falcon’s corner-specific shock absorbers deliver the best damping characteristics possible.

Kit Includes:
- Series 3.3 Fast Adjust Piggyback Shock Absorbers, Front and Rear
- Pair of Rear Roost Guards
- All Necessary Hardware

By design, Falcon shocks provide extremely predictable handling by improving both compression and rebound. In-house engineering experts have invested hundreds of hours in shock tuning to deliver optimal results that are literally felt by a 'seat-of-the-pants' experience. Falcon shocks are built with state of the art methods including CAD design, finite element analysis, in-house lab simulation and rigorous real world testing.

Order a Falcon Performance Shocks 10-01-33-400-000 Fast Adjust 3.3 Piggyback Shock Absorber Kit for your 2018-2019 2-Door Jeep JL Wrangler with a 0" to 1-1/2" Lift from CJ Pony Parts today!

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Wrangler years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 6.22ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 134.21ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;