Falcon Performance Shocks Piggyback Shock Absorber Kit 3.3 Fast Adjust For 2" To 4-1/2" Lift 4-Door Jeep Wrangler JL 2018-2019

Falcon Performance Shocks:
11-01-33-400-200
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 28.8ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
$1,599.99

Falcon Performance Shocks Fast Adjust 3.3 Piggyback Shock Absorber Kit for 2018-2019 4-Door Jeep JL Wranglers with a 2" to 4-1/2" Lift.

Whether your 2018-2019 4-door Jeep JL Wrangler is your daily driver or your vehicle of choice for off-roading, you want to make sure you get new aftermarket shocks that can keep up! That’s why CJ Pony Parts now carries this Falcon Performance Shocks Fast Adjust 3.3 Piggyback Shock Absorber Kit! 

Features & Benefits:
- Ideal for Daily Driven Jeeps and for Serious Enthusiast Who Wants Consistent, Firm Feel through All Driving Conditions
- Wide Range of Adjustability: Can be Tuned for Specific Terrain and Handling Characteristics
- Easily Change Damping Settings from Soft to Firm
- Fast Adjust Knob with 3 Compression Settings for Large Damping Adjustments
- Micro Position Dial with 8 Compression Settings for Finer Damping Adjustments
- Built from Ground Up with Focus on Fitment and Function
- Increased Stability, Improved Ride Quality and Comfort for Daily Drivers
- Race-Inspired Performance, Handling and Stability for Off-Road Rigs
- Engineered to Meet Specific Needs of 2018-2019 Jeep JL Wranglers
- Corner-Specific Shock Absorbers Deliver Best Fixed Rate Damping Characteristics Possible
- Optimized for On- and Off-Road Driving and for Clearance During Full Suspension Travel
- Front Shock has Unique Piggyback Design with Horizontal Reservoir to Increase Clearance for Large Tires
- Piggyback Design: Increased Capacity for Oil and Gas Charge Compared to Monotube or Twin Tube Shocks for Less Heat Build-Up and Reduced Fade for Significant Boost in Overall Performance
- Piggyback Design: Flows 6 Times More Oil Than Restrictive Reservoir Hose Designs and Eliminates Common Leakage Issues Found in Banjo and Swivel Fittings
- Volume Optimized Damping (VOD): Digressive Linear Valve that Produces Quicker Ramp-Up for Increased Damping Volume to Improve Vehicle Feedback and Control During Low-Speed Driving
- VOD Also Improves Shock’s Ability to Reduce Bottoming Out at Full Compression During Faster Speeds or Over Uneven Terrain
- Included Rear Roost Guards Prevent Shock Shaft Damage from Rocks Kicked Up by Tires
- 6061-T6 Aluminum Alloy Shock Body Resists Wear and Protects Internal Components While Providing Superior Heat Dissipation
- Smooth Honed Internal Shock Body Surface for Long-Term Performance
- 2-1/4" Shock Body Provides Optimal Performance
- 3/4" Induction-Hardened Chrome-Plated Shaft Resists Rock Damage and Corrosion and Prevents Shaft Buckling
- Maximum Shaft Diameter Allows for More Precise Tuning
- Hard Anodized Billet Piston
- One-Piece Teflon Bronze Piston Wear Band with O-Ring
- Inline Oil/Gas Separator (OGS) Prevents Cavitation
- Red Line Full Synthetic Shock Oil with High Viscosity Index of 519 for Consistent Performance Across All Temperatures and Reduced Shock Fade
- Synthetic Formula Also Contains Special Anti-Wear and Lubricity Agents for Excellent Thermal Stability
- 1,000-Hour Salt Spray Corrosion Resistance Test on All Hardware
- Serviceable and Rebuildable (Factory Serviced)
- Built In-House at the TeraFlex Falcon Shocks Division
- Made in the USA
- Installation Time: 1.5 Hours 

This Falcon Performance Shocks (11-01-33-400-200) Fast Adjust 3.3 Piggyback Shock Absorber Kit combines the best of both worlds: you’ll get shocks that are just as comfortable on the highway as they are on the trails! These shocks have a 3-position fast adjust knob for large damping settings and an 8-position micro-position dial for finer damping adjustments. This means these shocks can easily be tuned to meet the handling needs of whatever terrain you’re on! You’ll enjoy increased vehicle stability, better dynamic roll control and low-speed damping, not to mention better fitment for clearance during full suspension travel. 

This Kit Includes:
- Four (4) Series 3.3 Fast Adjust Piggyback Shock Absorbers
- Pair of Rear Roost Guards
- All Necessary Hardware 

*Must extend bump stop strike pads a minimum of 2". 

Order a Falcon Performance Shocks (11-01-33-400-200) Fast Adjust 3.3 Piggyback Shock Absorber Kit for your 2018-2019 4-Door Jeep JL Wrangler with a 2" to 4-1/2" Lift from CJ Pony Parts today!

Installation Difficulty

Easy
Easy

Novice skill is required for this installation.

Vehicle Fitment

This product will fit the following Wrangler years:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.37ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 215.26ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;